Example 1.
The boiler switches on at the same time every day of the
week.
Step 1. Press Reset button with a pencil or similar tool to clear
the memory.
Step 2. Press CH button. To select display
Step 3. Press DAY button once. Mon to Sun are displayed at
the top of the screen.
Step 4. Press the H+ (hours) button and the M+ (minutes)
button to set the first “on” time of the day.
Step 5. Press the v button to select “Switch on“ symbol @
Step 6. Press CH button to store in memory.
Step 7. Press day button to display all of the days of the
week again.
Step 8. Press the H+ and the M+ to set the first “off“ time of
the day.
Step 9. Press on v button to select “Switch off“ symbol
0
Step 10. Press CH to store.
Step 11. Press day, H+, M+ and then CH for each on and off
period for a single day.The whole week has now been stored.
Step 12. By repeatedly pressing CH each of the times
entered can be viewed and checked. At this stage an
individual day‘s times can be changed. When that day is
displayed, press H+ and M+ as required.
Then it is necessary to set the current day and time. Please
refer to the relevant section page 32.
To Next Page
Loading...