Broadcom Stingray PS225 - Establishing an SSH Connection to the PS225

Broadcom Confidential 5880X-PS225-UG101
16
PS225 User Guide Quick Start Guide
3.4.3 Establishing an SSH Connection to the PS225
To establish an SSH connection to the PS225:
Assuming that the PS225 is available (through ping), the x86 host can access the ARM host on the PS225 by running ssh
using the following command:
ssh root@192.168.1.10
No password is required. The following command line prompt displays:
$ ssh root@192.168.1.10
Last login: Fri Feb 16 22:19:21 2018
root@bcm958802a8048c:~#
During the first run, it is recommended to execute uname -a to verify that the latest kernel available for the PS225 is
being used (verify the latest kernel with the Broadcom support team).
Broadcom Confidential