EasyManua.ls Logo

Broadcom Stingray PS225 - 1.2 Board Features

Broadcom Stingray PS225
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Broadcom Confidential 5880X-PS225-UG101
5
PS225 User Guide Quick Start Guide
1.2 Board Features
PCIe Interface:
– x8 PCI Express 3.0 compliant
– Single-Root I/O Virtualization (SR-IOV) with up to 128 VFs
– Function Level Reset (FLR) support
Processing Subsystem:
– 8-core ARMv8 A72 64-bit processor subsystem at 3.0 GHz
– 16 MB total cache (8 MB L2 + 8 MB L3)
– Two channels (64-bit + ECC) of DDR4 memory at 2,400 MT/s
Hardware Accelerators:
– TruFlow™ configurable flow accelerator engine
– Line-rate Crypto engine with single-pass hashing and encryption
– RAID 5/6 engine
Network Interface:
– Dual-port SFP28 pluggable media interface, supporting 25GbE or 10GbE optical transceiver or direct-attach copper
(DAC) cables
– RDMA over Converged Ethernet (RoCE) v1 and v2
– Advanced congestion avoidance
– Virtual network termination – VXLAN, NVGRE, Geneve, GRE
– Multiqueue, NetQueue, and VMQ
– Tunnel-aware stateless offloads:
IPv4 and IPv6
TCP, UDP, and IP checksum
Large send offload (LSO)
Large receive offload (LRO)
TCP segmentation offload (TSO)
Receive-side scaling (RSS)
Transmit-side scaling (TSS)
VLAN insertion/removal
– DCB support: PFC, ETS, QCN, DCBx
– Jumbo frames (up to 9 KB)
– Network boot (PXE, UEFI)
Security and Manageability:
– Secure Boot
– Secure Key Storage
– ARM PKA Engine
– NC-SI over MCTP (SMBus, PCIe VDM)
– NC-SI over RMB (via separate connector)
Form Factor:
– PCI Express CEM specification for half-height, half-length adapters
– I/O brackets available in both low profile and full height
Broadcom Confidential