Brocade Communications Systems 8 - Page 649

Fabric OS Command Reference 617
53-1001764-02
portCfg
2
dst_ipaddr Specifies an optional destination IP address (IPv4 or IPv6). All packets
destined for this IP address are tagged accordingly. If a destination IP
address is not specified, all packets not already tagged will be tagged.
The default is 0.0.0.0.
Examples To create an IP interface using IPv4:
switch:admin> portcfg ipif ge0 create 192.168.0.20 255.0.0.0 1500
Operation Succeeded
To create an IP interface using IPv6 with a prefix:
switch:admin> portcfg ipif ge0 create 2000::22/64 1500
Operation Succeeded
switch:admin> portshow ipif ge0
Port: ge0
Interface IPv4 Address NetMask Effective MTU Flags
----------------------------------------------------------
0 192.168.0.20 255.255.255.0 1500 U R M
1 192.168.0.21 255.255.255.0 1500 U R M
Interface IPv6 Address Len Effective MTU Flags
---------------------------------------------------------------
2 fe80::205:1eff:fec3:e6b2 64 1500 U R M
3 2000::20 64 1500 U R M
4 2000::21 64 1500 U R M
5 2000::22 64 1500 U R M
Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running
N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp
To delete an IP interface:
switch:admin> portcfg ipif ge0 delete 192.168.0.20
Operation Succeeded
To create a static IP route using an IPv4 destination address, a net mask, and a gateway address:
switch:admin> portcfg iproute ge0 create 192.42.0.0 255.255.255.0 192.168.0.250
Operation Succeeded
To create a static IP route using IPv6:
switch:admin> portcfg iproute ge0 create 2000::/64 2000::1:250
Operation Succeeded
switch:admin> portshow iproute ge0
Port: ge0
IP Address Mask Gateway Metric Flags
-------------------------------------------------------------
192.42.0.0 255.255.255.0 192.168.0.250 0 U G
192.168.0.0 255.255.255.0 * 0 U C
192.168.0.10 255.255.255.255 * 0 U H L
192.168.0.11 255.255.255.255 * 0 U H L
192.168.0.21 255.255.255.255 * 0 U C
192.168.0.250 255.255.255.255 * 0 U H L