NOTE
For standalone devices or a homogeneous stack, the manifest upgrade process downloads the boot
image to the device only if a newer boot image version is available.
The manifest file specifies images for both router and switch types. Based on the device family and
the type of image (switch or router), the appropriate images are installed.
After all the relevant images have been installed on the device, you are prompted to reboot the
device to complete the upgrade process.
Example of a manifest file upgrade
Brocade# copy tftp system-manifest 10.20.65.49 FI08000B3_Manifest.txt all-images-
primary
You are about to download boot image and boot signature image as well, ARE YOU SURE?
(enter 'y' or 'n'): y
Brocade# Flash Memory Write (8192 bytes per dot) .
DOWNLOADING MANIFEST FILE Done.
Brocade# Flash Memory Write (8192 bytes per dot)
Automatic copy to member units: 2
DOWNLOAD OF ICX6610 BOOT SIGNATURE Done.
Brocade# Load to buffer (8192 bytes per dot)
Automatic copy to member units: 2
................................................................Write to boot flash..
DOWNLOAD OF ICX6610 BOOT Done.
Brocade#Flash Memory Write (8192 bytes per dot)
Automatic copy to member units: 2
Copy ICX6610 signature from TFTP to Flash Done
Brocade#Flash Memory Write (8192 bytes per dot)
Automatic copy to member units: 2
......................................................................................
......................................................................................
....................................................................
WARNING: New user connected to this port.
Current number of users: 5
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
...................................................................................
Copy ICX6610 from TFTP to Flash Done.
Brocade# Flash Memory Write (8192 bytes per dot)
Automatic copy to member units: 3 4 5 7 8
.
COPY ICX6450 SIGNATURE TFTP to Flash Done .
Brocade# Flash Memory Write (8192 bytes per dot)
Automatic copy to member units: 3 4 5 7 8
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
......................................................................................
.................................................................PLEASE WAIT. MEMBERS
SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER DOWN THE UNIT....
Copy ICX6450 from TFTP to Flash Done
Brocade# Flash Memory Write (8192 bytes per dot)
Automatic copy to member units: 3 4 5 7 8
.
DOWNLOAD OF ICX6450 BOOT SIGNATURE Done
Brocade# Load to buffer (8192 bytes per dot)
Automatic copy to member units: 3 4 5 7 8
......................................................................................
.........PLEASE WAIT. MEMBERS SYNCING IMAGE TO FLASH. DO NOT SWITCH OVER OR POWER
DOWN THE UNIT...Write to boot flash..
ICX6450 Boot IMAGE COPY IS DONE .
Example of a manifest file upgrade
FastIron Ethernet Switch Software Upgrade Guide 27
53-1003632-02
To Next Page
Loading...
Need help?
General
