New OSPFv2 commands (Continued)TABLE 5
Command Note
[no] max-metric Configures Stub Router Advertisement
[no] nonstop-routing Enables OSPF nonstop routing capability
[no] nssa-translator Enables NSSA Type 7 to Type 5 LSA translation
[no] vrf-lite-capability Configures CE Router VRF-Lite capability (disables DN bit
checks)
cost (area decimal range sub-command) Configures area range cost
cost (area decimal range advertise sub-
command)
Configures area range cost for Advertise this type-3
summarization
cost (area decimal range not-advertise sub-
command)
Configures the area range cost for Not Advertise this type-3
summarization
Interface level command
[no] active Configures Active information. FastIron 07.4.00 behavior was
always active.
Show command
show ip ospf database database-summary Displays summary of OSPF database
show ip ospf summary Displays summary of OSPF instances
show ip ospf traffic Displays OSPF packet counters and errors
show ip ospf vrf Displays OSPF information for interfaces configured in a
particular VRF
Clear command
clear ip ospf traffic Clears OSPF packet counters and errors
clear ip ospf vrf Resets OSPF for VRF
Modified OSPFv2 commands TABLE 6
FastIron release 08.0.xx FastIron release 07.4.00 Note
Global level command (router OSPF and sub-command)
Appendix A: Changes Between Releases
40 FastIron Ethernet Switch Software Upgrade Guide
53-1003632-02
To Next Page
Loading...
Need help?
General
