Deprecated OSPFv2 commands TABLE 7
Command Note
Global level commands (router OSPF and sub-commands)
RFC 1583-type3-cost In FastIron 08.0.xx, if RFC 1583 compatibility is configured, sets the cost for
advertised type 3 summary LSAs to the smallest cost of any of the component
networks
Show command
show ip ospf error Displays OSPF warnings and errors
show growable pool info Displays growable pool information
Clear command
clear ip ospf area Clears OSPF area
clear ip ospf error Clears OSPF error
clear ip ospf graceful-restart Clears OSPF graceful restart
clear ip ospf redistribution Clears all routes redistributed through other protocols
OSPFv3
New OSPFv3 commands TABLE 8
Command Note
Global-level command (router OSPF and sub-command)
[no] ipv6 router ospf vrf Configures OSPFv3 with a VRF index
[no] graceful-restart helper Configures OSPFv3 graceful restart options (helper only)
[no] nonstop-routing Enables the OSPFv3 nonstop routing capability
area decimal sub-command nssa Specifies an NSSA area
area decimal range sub-command cost Configures area range cost
area decimal range advertise sub-command
cost
Configures area range cost for Advertise this type-3
summarization
area decimal range not-advertise sub-
command cost
Configures area range cost for Not Advertise this type-3
summarization
distribute-list prefix-list ascii string in
loopback
Configures the OSPFv3 distribution list using an IPv6 prefix list
as input
Interface-level commands
OSPFv3
42 FastIron Ethernet Switch Software Upgrade Guide
53-1003632-02