3-29
6. Move the park brake lever fractionally downward, just over center, slightly releasing it. Hold
park brake lever switch in the off position.
7. Slowly release the foot brake pedal.
8. If the machine has not moved, use maximum engine speed. The machine should not move.
9. Do not do this test for longer than 30 seconds.
10. Reduce engine speed to an idle.
11. Return the park brake lever to the fully on position from its partially applied position. Place
transmission in neutral.
12. If the machine moved during the test, adjust the parking brake by checking the clearance
between the park brake pad and brake disc. Maximum clearance is .010” with park brake
lever in the OFF position, and repeat the test.
To Next Page
Loading...
