IOM BiRotor Plus R27Page 9/58
25% of Net Order after Release to Engineering,
50% of Net Order after Release to Manufacturing,
75% of Net order after 50% Manufacture
Complete and 100% of Net Order once
Manufacturing is complete. Any request for
return of product already shipped to Buyer will be
at the discretion of Brodie. If so approved, a
Return Authorization will be provided and a
restocking fee assessed.
5. LIMITED WARRANTY: Subject to the limitations
contained in Section 2 herein and except as
otherwise expressly provided herein, Brodie Meter
Co., LLC (“Brodie”) warrants the
Goods-manufactured by Brodie will be free from
defects in materials or workmanship under normal
use and care until the expiration of the applicable
warranty period. Goods are warranted for twelve
(12) months from the date of installation and 18
months from date of shipment, whichever occurs
first. Consumables and Services are warranted for
a period of 90 days from the date of shipment or
completion of the Services. Products purchased
by Brodie from a third party for resale to Buyer
(“Resale Products”) shall carry only the
warranty extended by the original manufacturer.
Buyer agrees that Brodie has no liability for Resale
Products beyond making a reasonable commercial
effort to arrange for procurement and shipping of
the Resale Products. If Buyer discovers any
warranty defects and notifies Brodie thereof in
writing during the applicable warranty period,
Brodie shall, at its option, repair or replace, that
portion of the Goods found by Brodie to be
defective or refund the purchase price of the
defective portion of the Goods/Services. All
replacements or repairs necessitated by
inadequate maintenance, normal wear and usage,
unsuitable power sources, unsuitable
environmental conditions, accident, misuse,
improper installation, modification, repair, storage
or handling, or any other cause not the fault of
Brodie, are not covered by this limited warranty,
and shall be at Buyer’s expense. Brodie shall not be
obligated to pay any costs or charges incurred by
Buyer or any other party except as may be agreed
upon in writing in advance by an authorized Brodie
representative. All costs of dismantling,
reinstallation and freight and the time and
expenses of Brodie’s personnel for site travel
and diagnosis under this warranty clause shall
be borne by Buyer unless accepted in writing by
Brodie. Brodie is not responsible for damages that
incur during shipment to Buyer for shipments that
are F.O.B. Brodie Factory, FCA Brodie Factory, or
EXWORKS Brodie Factory. Shipping charges for
goods returned to Brodie under warranty will be at
Buyer’s expense. Products found not to be
warranted can be repaired and returned at
Buyer’s expense and return charges born by Brodie
will be added to the cost of repair or returned to
Buyer “as received” at Buyer’s expense. Insurance
for returned products will be at Buyer’s expense.
For all returned products please package to
prevent damage, or future damage during
shipment. Make sure the products are cleaned,
free from grease oil, chemicals and other
materials that may hamper defect detection and
impede repair. All returned items must be
accompanied with a MSDS for the products that
have been in contact with the equipment, including
cleaning agents. A decontamination statement,
RMA, and Customer Problem Report must also
accompany equipment returned. Product received
in an unsuitable condition will be returned at
Buyer’s expense without being examined. Goods
repaired, and parts replaced during the warranty
period shall be in warranty for the remainder of
the original warranty period or ninety (90) days,
whichever is longer. This limited warranty is the
only warranty made by Brodie and can be
amended only in a writing signed by an
authorized representative of Brodie. Except as
otherwise expressly provided in the Agreement,
there are no representations or warranties of any
kind, expressed or implied, as to
merchantability, fitness for a particular purpose, or
any other matter with respect to any of the goods
or services. It is understood that corrosion or
erosion of materials is not covered by our
guarantee unless the Buyer has notified the Seller
the product will be used in an environment
conducive to corrosion and/or erosion and the
product has been coated with Brodie’s
recommended method of protection against
corrosion / erosion.
To Next Page
Loading...
Need help?
General