EasyManua.ls Logo

BRONKHORST FlowDDE - SUPPORTED INSTRUMENTS; SYSTEM REQUIREMENTS; INSTALLATION AND START UP

Default Icon
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BRONKHORST®
Page5FlowDDE  9.17.067
1.3 SUPPORTEDINSTRUMENTS
AllFLOW‐BUSinstrumentsandinstrumentswithRS232communication,withthefollowinglimitations:
RS232/FLOW‐BUSinterface:16‐bitisnotsupportedand32‐bitfirmware>=4.09only
Digitalmassflowmeters/controllerswithoutRS232communication:firmware>=V5.xxonly
Digitalreadoutcontrolmodules(E‐7000):firmware>=
V3.xxonly
1.4 SYSTEMREQUIREMENTS
Processor x86orx64700MHzorhigher
Memory(RAM) 64MB
Harddisk 20MBavailablediskspace
Display 800x600orhigherresolution,256colorsormore
Connections RS232portwithFIFObuffers
Operatingsystem Windows2000,XP,Vista(x86orx64)or7(x86orx64)
The digit groupingsymbol of currency must always differ from the number’s decimalsymbol. Having
equalsymbolsisnotvalid(notjustinthissituation,butalsoinothersituations)andwillprobablycause
otherproblemsaswell.SeeMicrosoft’sKB198098.
Toavoidcommunicationerrors,itisadvisedtouseaserial(RS232)portwithhardwarebufferoverrun
detection.FewUSB‐RS232convertershavethisfeature,bute.g.theDigituspartno.DA‐70156has.
1.5 INSTALLATIONANDSTARTUP
Followon‐screeninstructionswheninstallingFlowDDE.
FlowDDEwillbeinstalledinC:\ProgramFiles\Bronkhorst\FlowDDE32.
StartFlowDDEthroughtheStartmenu:Start>>(All)Programs>>Bronkhorst>>FlowDDEV4.67.
C:\ProgramFilesisasystemfolderandisfollowedby(x86)on64‐bitWindowsversionsandmaydiffer
onnon‐EnglishWindowsversions.
1.5.1 Startupoptions
In some situations, it is convenient that FlowDDE behaves differently or performs an action after startup. The
followingstartupoptionsareavailable:
FlowDDE/o opencommunicationtoFLOW‐BUS
FlowDDE/s startsimulationmode
FlowDDE/d acceptallFLOW‐BUSconfigurationchangesonopencommunication
FlowDDE/q disablepopupmessageboxes
FlowDDEC:\client.exe starttheclientapplicationC:\client.exe(usuallyincombinationwith/o)