Brookeld Engineering Labs., Inc. Page 27 Manual No. M02-313E1209
Windows NT or higher. CAPCALC application software displays, prints and stores tabulated
data les (Brookeld, Excel).
CAPCALC software has automatic data capture (up to 200 data points per test) and graphi-
cal data display (rheograms) to facilitate analysis of test samples. The software also allows
temperature control of the sample plate for integrated viscosity/temperature tests between 5°C
and 75°C (CAP 2000+L) or 50°C and 200°C (CAP 2000+H) depending on viscometer model.
CAPCALC features include on-screen and printed plots of % F.S.R., viscosity or shear stress vs.
cone speed, shear rate, time or temperature. Also available are automatic calculation of Yield
Stress (Bingham Plastic or Casson) and Power Law Consistency Index.
Additional information on the communications protocol for CAP 2000+ is contained in
Appendix B
.
Contact Brookeld or our authorized agent to obtain the CAPCALC software program.
To Next Page
Loading...
Need help?
General
