11
BASIC OPERATION
COMPATIBILITY
CONNECTING THE MAIN UNIT TO THE POWER
1. Insert the AC output end of the included POWER CORD into the AC POWER
SOCKET located on the bottom of the unit.
2. Plug the other end of the POWER CORD into an electrical outlet.
REMOTE BATTERY INSTALLATION
1. Open the BATTERY COMPARTMENT COVER on the remote control.
2. Insert a new CR2025 button cell battery according to the polarity indicators
inside the compartment.
3. Close the BATTERY COMPARTMENT COVER securely.
USING THE REMOTE CONTROL
For best results, aim the remote towards the unit’s remote sensor from within
16 feet and an angle of 60 degrees or less. Ensure there are no objects blocking
the path of the remote’s signal.
Important: Remove the battery during storage or when you are not using
the unit for an extended period of time.
iPhone
iPhone 3G
iPhone 3GS
iPod nano (4th and 5th generation)
iPod (1st and 2nd generation)
iPod Classic
To Next Page
Loading...
