Brookstone IDESIGN - Volume Adjustment; Mode Selection

12
TURNING THE UNIT ON/OFF
Press the button on the unit or on the remote control to turn on the unit, and
“HELLO” will appear on the display. When the unit is on, press the
button to turn
the unit off and “GOODBYE” will appear. After a while, “GOODBYE” will disappear
and display the clock in standby state.
MUTE
Press the button to mute the sound instantly and “ ” will flash on the screen.
Pressing it again will resume sound
.
VOLUME ADJUSTMENT
Press / buttons on the unit or the VOL-/VOL+ button on the remote
to decrease or increase the volume level.
EQUALIZATION
Press the EQ button on the unit or on the remote to turn on equalization
function and to select desired audio mode. There are four kinds of modes
as shown in order below:
ROCK > POP > JAZZ > CLASS > OFF
MODE SELECTION
Press the FUNCTION button on the unit or the FUNC button on the remote
to select the desired mode, such as CD, iPod, TUNER, AUX mode.