14
2. Use the / buttons to select “24 HOUR” or “12 HOUR”.
3. Press the C-ADJ button to confirm and the hour will flash. Use the
/ buttons to select the hour.
4. Press the C-ADJ button again and the minute will flash. Use the
/
buttons to select the minute.
5. Press the C-ADJ button to confirm the time.
Note:
• Press any button on the remote control or on the unit (except the button) and
the clock will appear. The clock will display for ten minutes.
• In other modes, press and hold the C-ADJ button to display the clock
for several seconds.
SETTING THE TIMER
In any mode:
1. Press and hold the TIMER button, “
ON” will appear on the screen and
“AM 12:00” will flash.
2. Press the
/ buttons to select the hour, then press the TIMER
button to confirm.
3. The minutes will flash. Press the
/ buttons to select the minutes, then
press the TIMER button to confirm.
4. The “
OFF” will appear on the screen and the hour will blink. You can then set
the time at which you'd like the unit to power off.
To Next Page
Loading...
