Brookstone IDESIGN - Ipod;Iphone Operation

20
ID3 INFORMATION DISPLAY
For an MP3 ID3 disc, press the ID3 button on the remote control to select
“ID3 ON”. The ID3 information (if available: song title, directory name, artist name,
other contents…) will be displayed on the screen. If you select “ID3 OFF”,
the ID3 information will not appear.
iPod/iPhone OPERATION
SWITCHING TO iPod MODE
1. Press the button to open the disc cover, you will see the iPod/iPhone interface.
2. On the left side of the iPod/iPhone area there is a
button. Push to release the
iPod/iPhone 30 pin connector to let you place the iPod or iPhone on the unit.
3. Close the cover and then keep pressing the FUNCTION button on the unit
or the FUNC button on the remote to select iPod mode. This unit can play
both the audio and video files stored on your iPod or iPhone device.
SELECTING TRACKS
1. Press the / buttons to skip to the previous/next track.
2. Press and hold
the / buttons to fast reverse/forward. iPod/iPhone will
begin to play a track when you release the button.
PAUSING PLAYING
Press the button on the unit or on the remote to pause. Press it again to resume
play. Press and hold it to power off the iPod.