STORE FM STATIONS INTO MEMORY
1. Press the PROG/MEM/C-ADJ button on the remote to store the station you are
currently listening to. The icon “Prog” will appear for several seconds, along with a
blinking channel number.
2. Press the
/ buttons on the remote control to scroll through the channel
numbers and press the PROG/MEM/C-ADJ button again to store that station
under that channel number.
MONO/STEREO
Press the ST-MO button to select stereo or mono stereo mode. You can sometimes
improve reception of distant stations by selecting the mono operation and fine-tuning.
When the unit is in stereo mode, “ST” will display on the screen.
CD/MP3 OPERATION
SWITCHING TO CD MODE
Press the button to open the disc cover, then gently place the CD/MP3 disc
with the printed side up in the disc compartment and press
to close the disc cover.
Keep pressing the FUNCTION button on the unit or the FUNC button on the remote
until you see the CD icon on the screen and play the disc.
SELECTING TRACKS
1. Pressing the / buttons will skip to the previous/next track and its track
number will be shown on the screen.
2. Press and hold the
/ buttons to fast reverse/forward within a track.
The disc will start playing when you release the button.
17
To Next Page
Loading...
