EasyManua.ls Logo

Broseley eVolution - Specification; Gas Type; Inlet Pressure; Gas Connection

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Endure Balanced Flue 4
Specification
Gay Type
Natural Gas
Inlet Pressure
20 Mbar +/- 1 mbat
Gas Connection
8mm Pipe
Injector
162
Pilot
PXX1313
Input High Rate (Gross)
4.2 kW (0.4m
3
/hr)
Input Low Rate (Gross)
2.9 kW (0.27m
3
/hr)
Battery Type (electronic Igniter)
AA
Wall Depth (Max)
350mm
Minimum Flue Length (Excluding Terminal)
105mm
NOx Class
Class 3
Efficiency Class
Class 1
Please note this product is designed to only use natural gas G20.
The installation of this appliance must be in accordance with the relevant parts of the
LOCAL AND NATIONAL BUILDING REGULATIONS as issued by the department of the
Environment or BUILDINGSTTANDARD (Scotland Consolidation) REGULATIONS
issued by the Scottish Development Department
Installation of this appliance must only be undertaken by a Gas Safe registered
installer.

Other manuals for Broseley eVolution

Related product manuals