Brother 1034D User Manual (English)

Other manuals for Brother 1034D

Handbook68 pages

Manual16 pages

Handboek Voor De Compacte68 pages

Questions and Answers:

L
Lori McconnellJul 31, 2025
Why do threads break on my Brother 1034D Sewing Machine?
- N
  Natalie MccartyJul 31, 2025
  If the threads break while using your Brother Sewing Machine, several factors could be at play. Ensure the machine is threaded correctly. Check the spool pin and thread holders for any tangled thread, and remove it. The thread tension might be too tight, so adjust it accordingly. Verify that the needle is installed correctly and that you're using the correct type of needle (Schmetz 130/705H is suggested).
J
Jennifer BerryAug 7, 2025
What to do if my Brother Sewing Machine is skipping stitches?
- H
  htorresAug 7, 2025
  Skipped stitches on your Brother Sewing Machine can occur due to several reasons. A bent or blunt needle should be replaced. Ensure the needle is installed correctly. Using the correct needle (Schmetz 130/705H is suggested) is important. Also, make sure the machine is threaded correctly and that the presser foot pressure isn't too loose; if it is, turn the pressure adjustment screw clockwise to increase it.
A
Alicia ZhangAug 14, 2025
Why are the needles breaking on my Brother 1034D?
- J
  Julie JohnsonAug 14, 2025
  Needle breakage in your Brother Sewing Machine could be due to a few reasons. Replace bent or blunt needles with a new one. Ensure that the needles are installed correctly. Avoid pulling the material too hard when sewing.
W
williamgrayAug 22, 2025
How to prevent fabric from puckering with my Brother 1034D?
- Z
  zachary58Aug 23, 2025
  If the fabric puckers when using your Brother Sewing Machine, it might be due to thread tension being too tight. Decrease the thread tension when sewing lightweight or fine material. Also, ensure proper threading and check for any tangled thread.

Brother 1034D Specifications

General

Type	Serger
Number of Threads	3 or 4
Stitch Length	1.0mm to 4.0mm
Differential Feed	Yes
Differential Feed Ratio	0.7 to 2.0
Maximum Sewing Speed	1, 300 stitches per minute
Color-Coded Threading	Yes
Adjustable Stitch Width	Yes
Free Arm	Yes
Thread Tension	Adjustable
Presser Foot Lifter	Yes
Built-in Thread Cutter	Yes
Free Arm Capability	Yes
Power Requirements	120V, 60Hz
Stitch Types	rolled hem
Stitch Width	5.0mm - 7.0mm (overlock), 2.0mm (rolled hem)
Needle	Standard sewing machine needles (size 11 or 14)
Included Accessories	gathering foot