What does 'File Name Cannot Be Used' mean on my Brother All in One Printer?
The 'File Name Cannot Be Used' message on your Brother All in One Printer means that the maximum sequential number for the file name has been reached. Press any key (ADS-2100e or ADS-2600We) and then either delete unused files from the USB flash drive or change the file name.
Why is my Brother All in One Printer showing 'Replace Parts'?
The 'Replace Parts' message on your Brother All in One Printer indicates that both the Separation Pad and the Pick-up Roller have been used over 50,000 times. Replace both the Separation Pad and the Pick-up Roller with new ones to prevent scanning errors.
Why is my Brother All in One Printer showing 'Replace Roller'?
The 'Replace Roller' message on your Brother All in One Printer indicates that the Pick-up Roller has been used over 50,000 times. Replace the Pick-up Roller with a new one to prevent scanning errors.
Why is my Brother All in One Printer showing 'Too Many Files on USB'?
The 'Too Many Files on USB' message on your Brother All in One Printer means that the USB flash drive contains too many files. Remove the USB flash drive, press any key (ADS-2100e or ADS-2600We). Delete unused files or folders from the root folder of the USB flash drive and then try again.
Why is my Brother All in One Printer document jammed or too long?
A document jam or 'too long' error on your Brother All in One Printer can occur for several reasons: * The document guides are not set to the correct document size. * The settings are not suitable for your document. * Paper dust has accumulated on the Pick-up Roller or Separation Pad. To resolve this, first clear the document jam. Then, adjust the document guides to fit the document width, ensuring that narrow pages are inserted straight and as close to the center as possible when using Auto Scan Size. Confirm that your settings are appropriate for the document. Clean the Pick-up Roller and Separation Pad.
Why is my Brother All in One Printer showing 'USB Access Error'?
The 'USB Access Error' message on your Brother All in One Printer indicates that the USB flash drive was removed while it was being accessed. Press any key (ADS-2100e or ADS-2600We models).
Why does my Brother All in One Printer say 'Replace Pad'?
The 'Replace Pad' message on your Brother All in One Printer indicates that the separation pad has been used over 50,000 times. Replace the separation pad with a new one to prevent scanning errors.
How do I fix a skewed scanned image on my Brother All in One Printer?
A skewed scanned image on your Brother All in One Printer can be caused by: * The document guides are not adjusted to fit the width of the document. * The Auto Deskew feature was set to Off when the document was scanned. To fix this, adjust the document guides to fit the width of the document. If using Auto Scan Size with documents of varying page sizes, insert narrow pages straight and as close to the machine's center as possible. If the document doesn't stay straight, use Continuous Scanning. Also, set Auto Deskew to On.
Why is my Brother All in One Printer showing 'USB Hub Not Supported'?
The 'USB Hub Not Supported' error on your Brother All in One Printer means that a hub or USB flash drive with a hub is connected to the USB direct interface. Remove the unsupported device, such as a USB hub or USB flash drive with a hub, from the USB direct interface.
How to fix vertical lines in scanned images from my Brother All in One Printer?
Vertical lines in scanned images from your Brother All in One Printer are usually caused by paper dust on the glass strips. Clean the glass strips inside the machine to resolve this issue.
General| Film scanning | - |
|---|---|
| Color scanning | Yes |
| Grayscale levels | 256 |
| Input color depth | 30 bit |
| Maximum scan size | 210 x 297 mm |
| Output color depth | 24 bit |
| ADF scan speed (b/w, A4) | 24 ppm |
| Enhanced scan resolution | 1200 x 1200 DPI |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 24 ipm |
| Black/white scanning color modes | Grayscale, Monochrome |
| Scanner type | ADF scanner |
| Product color | Black |
| Scan to | E-mail, File, Image, OCR, USB |
| Sensor type | CMOS dual CIS |
| Scan drivers | ICA, ISIS, TWAIN, WIA |
| Internal memory | 256 MB |
| Scan file formats | JPG, PDF, TIFF |
| Built-in processor | Star Sapphire |
| Maximum duty cycle | 1500 pages per month |
| Processor frequency | 400 MHz |
| Scanning noise level | 62.5 dB |
| Daily duty cycle (max) | - pages |
| Standard input capacity | 50 sheets |
| ISO A-series sizes (A0...A9) | A4, A5, A6, A8 |
| ISO B-series sizes (B0...B9) | B5, B6, B8 |
| Scanning media types supported | Business Card, Plain paper, Plastic Card, Recycled paper, Thick paper, Thin paper |
| Maximum ISO A-series paper size | A4 |
| Auto Document Feeder (ADF) media weight | 52 - 110 g/m² |
| USB version | 2.0 |
| Standard interfaces | USB 1.1, USB 2.0 |
| Input voltage | 220-240 V |
| Power supply type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (off) | 0.3 W |
| Power consumption (standby) | 4 W |
| Power consumption (typical) | 18 W |
| Power consumption (PowerSave) | 1.5 W |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks |
| Windows operating systems supported | Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Operating temperature (T-T) | 5 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Sustainability certificates | ENERGY STAR |
| Package depth | 291 mm |
| Package width | 383 mm |
| Package height | 285 mm |
| Package weight | 5400 g |
| Cables included | USB |
| Bundled software | Nuance PDF Converter Professional 8\\r Nuance PaperPort 12 SE\\r PageManager 9\\r NewSoft Presto! BizCard 6\\r Brother Control Center 4 |
| Custom media width | 51 - 215.9 mm |
| Custom media length | 70 - 863 mm |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 299 mm |
| Height | 179 mm |
| Weight | 3300 g |
Quick Setup Guide/Product Safety Guide.
User's Guide, Network User's Guide, Web Connect Guide.
Scan document to graphics app or OCR.
Scan to default e-mail app.
Scan to a folder on hard disk.
Use drivers with applications.
Use TWAIN/ICA drivers with apps.
Scan via Web Services protocol.
Scan to USB, FTP, Network, E-mail, Web.
Scan from Android, iOS, Windows Phone.
Explains the ADS-2100e control panel.
Explains the ADS-2600We touchscreen.
Details of the touchscreen interface.
How to operate the LCD and menus.
Details of documents suitable for scanning.
Lists documents that cannot be scanned.
Instructions for loading various document types.
Use ControlCenter4 in Home Mode.
Use ControlCenter4 in Advanced Mode.
Modify scan settings for ControlCenter4.
Use ControlCenter2 for Mac scanning.
Convert scans to Office files.
Scan business cards using ControlCenter2.
Modify scan settings for ControlCenter2.
Scan using PaperPort or other apps.
Scan using Presto! PageManager or TWAIN.
Save scans to computer via ControlCenter.
Save scans to USB drive.
Send scans directly via e-mail.
Configure Scan to PC settings for Windows.
Configure Scan to PC settings for Mac.
Monitor machine status using Status Monitor.
Monitor machine status on Mac.
Configure machine settings remotely.
Steps to replace the separation pad.
Steps to replace the pick-up roller.
Common error and maintenance messages.
Steps to clear a document jam.
Common scanning problems and solutions.
System requirements for PC connection.
To Next Page
