BAS-311H
CONTENTS
1. NAMES OF MAJOR PARTS ................ 1
2. USEFUL FUNCTIONS FOR
OPTIMUM SEWING.............................. 2
3. INSTALLATION.................................... 3
3-1. Table processing diagram ................................ 4
3-2. Installing the control box................................... 5
3-3. Installing the oil pan.......................................... 5
3-4. Installing the machine head.............................. 6
3-5. Installing the operation panel............................ 9
3-6. Installing the two-pedal foot switch ................. 10
3-7. Connecting the cords........................................ 10
3-8. Connecting the ground wire.............................. 13
3-9. Connecting the power cord............................... 14
3-10. Installing the cotton stand............................... 17
3-11. Installing the pneumatic unit
(pneumatic work clamp specifications)............. 18
3-12. Installing the eye guard .................................. 19
3-13. Installing the side cover and rear cover.......... 19
3-14. Lubrication ...................................................... 20
3-15. Installing the machine head fixing bolt ........... 21
3-16. Installing the bobbin winder tension ............... 21
3-17. Checking the machine head switch................ 21
4. PREPARATION BEFORE SEWING.....22
4-1. Installing the needle.......................................... 22
4-2. Threading the upper thread .............................. 22
4-3. Winding the lower thread.................................. 24
4-4. Installing the bobbin case................................. 25
4-5. Thread tension.................................................. 26
4-5-1. Lower thread tension ........................... 26
4-5-2. Upper thread tension ........................... 26
4-6. Starting up ........................................................ 27
5. USING THE OPERATION PANEL
(BASIC OPERATIONS) .......................28
5-1. Name and function of each operation
panel item .........................................................28
5-2. Program setting method....................................30
5-2-1. Parameter list .......................................31
5-3. Copying programs.............................................33
5-4. Checking the sewing pattern.............................34
5-5. Setting the work clamp lift amount ....................35
6. USING SD CARDS ...............................37
6-1. Notes on handling SD cards
(commercially available) ...................................37
6-2. Preparation for reading and writing data...........38
6-3. Reading additional sewing data........................39
7. SEWING ...............................................40
7-1. Sewing ..............................................................40
7-2. Using the STOP switch .....................................41
Document CD ...........................................42
To Next Page
Loading...
