Brother BAS-341F - Spool Stand and Programmer Installation

3. PREPARATION
BAS-341F, 342F
6
3-7. Installing the spool stand
Install the spool stand (1) to the table.
3-8. Installing the programmer (option)
1. Install the programmer support (2) to the work table with the two screws (1).
2. Insert the programmer connector (4) securely into the left side of the operation panel (3).
(1)
(2)
1 181S
[Flat]
(
2
)
(
1
)
(4)
(3)
1 182S 1 183S
[Vertical]
(1)
(2)
0073Q
(1)