Chapter 7 Operation of Machine
BES-962BC • BES-1262BC
199
8-2 Inching Mode during Embroidering (Forcible Hoop Movement)
1. Press the jog switch while
pressing the "STOP" switch
and "AJST" is displayed.
2. Press the jog switch
to forcibly change
the hoop. "JOG" is displayed.
3. Press the "START" switch and press the jog
switch. The hoop moves to the direction of
the pressed switch.
Notes) • Note that the forcible hoop movement will
produce deviation of embroidering by the
amount.
• If the hoop and material are deviated from
each other during embroidering, correct it
by using the jog switches.
4. Pressing the STOP switch
resets the inching mode.
5. Press the START switch
restarts embroidering.
STOP
To Next Page
Loading...
Need help?
General
