viiiviii
Confidential Confidential
POWER CORD SAFETY:POWER CORD SAFETY:
•• Use onlUse only the power cy the power cord supplord supplied with tied with this produhis product.ct.
•• DO NOT allow anDO NOT allow anything to resything to rest on the power cord. DO Nt on the power cord. DO NOT place thiOT place this products product
where people can walk on the cord.where people can walk on the cord.
•• DO NOT placDO NOT place this produce this product in a position whet in a position where the cord is strre the cord is stretched or straetched or strain isin is
otherwise put on the cord. Doing so may cause the cord to become worn or frayed.otherwise put on the cord. Doing so may cause the cord to become worn or frayed.
•• Brother stBrother strongly recrongly recommends thommends that you DO NOT adviat you DO NOT advise using an extese using an extension cornsion cord.d.
•• DO NOT put a toner carDO NOT put a toner cartridge and drtridge and drum unit asseum unit assembly into a firembly into a fire. It could explo. It could explode,de,
resulting in injuries.resulting in injuries.
•• DO NOT use DO NOT use flammable substances, any flammable substances, any type of spraytype of spray, or an organic , or an organic solvent/liquidsolvent/liquid
containing alcohol or ammonia to clean the inside or outside of the product. Doingcontaining alcohol or ammonia to clean the inside or outside of the product. Doing
so could cause a fire so could cause a fire or electrical shock. Instead, use or electrical shock. Instead, use only a dry, lint-free cloth.only a dry, lint-free cloth.
DO NOT attempt to operate this product with a paper jam or with stray pieces of paperDO NOT attempt to operate this product with a paper jam or with stray pieces of paper
inside the product. Prolonged contact of the inside the product. Prolonged contact of the paper with the fuser unit could cause paper with the fuser unit could cause a fire.a fire.
DO NOT use a vacuum cleaneDO NOT use a vacuum cleaner to clean up scattered r to clean up scattered toner. Doing this might causetoner. Doing this might cause
the toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Pleasethe toner dust to ignite inside the vacuum cleaner, potentially starting a fire. Please
carefully clean the toner carefully clean the toner dust with a dry, lint-free soft cloth and dispose of it dust with a dry, lint-free soft cloth and dispose of it accordingaccording
to local regulations.to local regulations.
HOT SURFACEHOT SURFACE
After you have just used the product, some internal parts of the product will beAfter you have just used the product, some internal parts of the product will be
extremely hot. Wait at least 15 minutes for the product to cool down before you touchextremely hot. Wait at least 15 minutes for the product to cool down before you touch
the internal parts of the product.the internal parts of the product.
To Next Page
Loading...
