Brother DCP-1623W

To Next Page

To Previous Page

2-152-15

 Confidential Confidential

 

7.7.22 SiSide de cocovever R r R / F/ Fan an (o(onlnly fy for or momodedels ls wiwith th fafan)n)

(1)(1) RemovRemove the e the two two taptittaptite bine bind B Md B M4x12 4x12 "A" sc"A" screws.rews.

(2)(2) RemovRemove the three be the three boss bushoss bushings of the sings of the side coveide cover R. Pull out tr R. Pull out the three the three tabs and reabs and releaselease

the four hooks on the bottom. Disconnect the speaker harness (only for MFC models) andthe four hooks on the bottom. Disconnect the speaker harness (only for MFC models) and

the fan harness (only for the fan harness (only for models with fan) from tmodels with fan) from the main PCB AShe main PCB ASSYSY, and remove the side, and remove the side

cover R from the machine.cover R from the machine.

(3)(3) RemovRemove the taptie the taptite bind B M4x1te bind B M4x12 screw2 screw, and relea, and release the hook tse the hook to remove the do remove the dress coveress cover Rr R

from the side cover R.from the side cover R.

Fig. 2-5Fig. 2-5

Harness routing: Refer toHarness routing: Refer to “

“2.2.Frame R / main PCB ASSY / low voltage power supply PCB unitFrame R / main PCB ASSY / low voltage power supply PCB unit

/ fuser unit (DCP-15** series with fan, MFC-18** series with fan)/ fuser unit (DCP-15** series with fan, MFC-18** series with fan)””,, ““33.. Frame R / main PCBFrame R / main PCB

ASSY / low voltage power supply PCB unit / fuser unit (DCP-16** series, MFC-19ASSY / low voltage power supply PCB unit / fuser unit (DCP-16** series, MFC-19** series)** series)””

andand “

“1515.. Fan (only for models with fan) / speaker harness (side cover R ASSY)Fan (only for models with fan) / speaker harness (side cover R ASSY)””..

Taptite bind B M4x12Taptite bind B M4x12

Taptite bind BTaptite bind B

M4x12 "A"M4x12 "A"

TabsTabs

HooksHooks

TabTab

Taptite bind BTaptite bind B

M4x12 "A"M4x12 "A"

HookHook

Dress cover RDress cover R