Brother DCP-1623W

2-162-16
 Confidential Confidential
 
(4)(4) RemovRemove the speakee the speaker hold sprinr hold spring from the sidg from the side cover R. Remoe cover R. Remove the speakve the speaker from the sider from the sidee
cover R, and release the speaker harness from the securing fixtures (only for MFCcover R, and release the speaker harness from the securing fixtures (only for MFC
models).models).
(5)(5) RemovRemove the tapte the taptite bind B M4ite bind B M4x12 screwx12 screw, and relea, and release the each hse the each hook to remoook to remove the fanve the fan
cover from the side cover R. Release the fan harness from the securing fixtures, andcover from the side cover R. Release the fan harness from the securing fixtures, and
remove the fan from the side cover R (only for models with fan).remove the fan from the side cover R (only for models with fan).
Fig. 2-6Fig. 2-6
Harness routing: Refer toHarness routing: Refer to “
“1515.. Fan (only for models with fan) / speaker harness (side cover RFan (only for models with fan) / speaker harness (side cover R
ASSY)ASSY)””..
(6)(6) Close Close the top the top cover cover ASSY and ASSY and the docthe document sument scanner canner unit.unit.
HookHook
Taptite bind B M4x12Taptite bind B M4x12
(only for models with fan)(only for models with fan)
Fan (only for models with fan)Fan (only for models with fan)
Fan harnessFan harness
Fan coverFan cover
(only for models with fan)(only for models with fan)
HookHook
Side cover RSide cover R
Speaker harnessSpeaker harness
Speaker hold springSpeaker hold spring
(only for MFC models)(only for MFC models)
SpeakerSpeaker
(only for MFC models)(only for MFC models)