Brother DCP-1623W

2-202-20
 Confidential Confidential
 
7.7.3.3.55 DoDocucummenent ct covover er susupppporortt
(1)(1) RemovRemove the documee the document cover sunt cover support from thpport from the ADF unie ADF unit by slidit by sliding it to the ding it to the directiorection of then of the
arrow.arrow.
Fig. 2-12Fig. 2-12
77..33..66 DDooccuummeennt ct coovveerr
(1(1)) FlFlip oip ovever thr the ADe ADF unF unitit..
(2)(2) RemovRemove the two tae the two taptite binptite bind B M3x10 scrd B M3x10 screws to remoews to remove the loweve the lower chute supr chute support plaport plate fromte from
the ADF unit.the ADF unit.
(3)(3) ReleaRelease the hook anse the hook and boss whild boss while pushing the pushing the arm to the dire arm to the direction of the aection of the arrowrrow, and remove, and remove
the document hold from the ADF unit.the document hold from the ADF unit.
Fig. 2-13Fig. 2-13
ADF unitADF unit
Document cover supportDocument cover support
Document holdDocument hold
Taptite bind B M3x10Taptite bind B M3x10
Lower chute support plateLower chute support plate
ADF unitADF unit
BossBoss
HookHook
ArmArm