Brother DCP-1623W

2-272-27
 Confidential Confidential
 
77..55 PPaanneel l uunniitt
(1)(1) ReleasRelease the four (te the four (three for mohree for models widels without ADF unthout ADF unit) hookit) hooks to removs to remove the panee the panel PCBl PCB
ASSY from the panel cover.ASSY from the panel cover.
(2)(2) ReleasRelease the connece the connector lock, and ditor lock, and disconnesconnect the LCD flat cact the LCD flat cable from the pable from the panel PCB ASSYnel PCB ASSY..
(3)(3) Remove tRemove the rubber khe rubber key L (only foey L (only for MFC moder MFC models) and rubls) and rubber key R frober key R from the panm the panel coverel cover..
(4)(4) ReleasRelease the two hoe the two hooks to remoks to remove the LCD ove the LCD cover frocover from the panm the panel coverel cover..
(5)(5) ReleasRelease the twe the two hooks o hooks to removto remove the LCD e the LCD from the from the LCD covLCD coverer..
(6)(6) Remove Remove the Lthe LCD shCD sheet freet from the om the panel panel covercover..
Fig. 2-22Fig. 2-22
Assembling Note:Assembling Note:
•• After After the rthe replaceeplacement, ment, refer refer toto "5.
"5. IF YOU REPLACE THE PIF YOU REPLACE THE PANEL UNIT" in chapter ANEL UNIT" in chapter 33toto
enter the adjusted value of the laser unit.enter the adjusted value of the laser unit.
Panel PCB ASSYPanel PCB ASSY
LCD flat cableLCD flat cable
Rubber key LRubber key L
(only for MFC models)(only for MFC models)
HookHook
Connector lockConnector lock
Rubber key RRubber key R
LCDLCD
Panel coverPanel cover
LCD sheetLCD sheet
HooksHooks
HooksHooks
LCDLCD
covercover
HooksHooks
HookHook
(only for MFC models)(only for MFC models)