1.31.3 InitInitialializiizing ng the the EEPEEPROM ROM of tof the Mhe Main ain PCB PCB ASSASSY (fY (funcunctiotion con code: de: 01)01)
Initialize the EEPROM of the main PCB ASSY as described inInitialize the EEPROM of the main PCB ASSY as described in “Function code: 01” in Chapter 4.
“Function code: 01” in Chapter 4.
1.41.4 InsInstatallinlling Lg Langanguaguage Fe Firmirmwarware (e (excexcept ept for for ChiChinesnese me modeodel)l)
This procedure is not required for Chinese model.This procedure is not required for Chinese model.
(1)(1) Check thCheck that the macat the machine is in thine is in the maintehe maintenance monance mode, and conde, and connect the cnect the computer tomputer to theo the
machine with the USB cable.machine with the USB cable.
(2)(2) Open the tempOpen the temporary folorary folder and doubleder and double-click “F-click “FILEDG3ILEDG32.EXE” to st2.EXE” to start it, and selecart it, and select thet the
“Brother Maintenance USB Printer”.“Brother Maintenance USB Printer”.
(3)(3) Drag and drop tDrag and drop the requirehe required languagd language program fie program file (ex: LZXXXle (ex: LZXXXX_$.djfX_$.djf) in the same fol) in the same folderder
onto the “Brother Maintenance USB Printer” icon. The file is loaded to the machine, andonto the “Brother Maintenance USB Printer” icon. The file is loaded to the machine, and
installing to the flash ROM starts.installing to the flash ROM starts.
(4)(4) When instWhen installing ialling is complets completed, the mached, the machine restine restarts and rarts and returns to theturns to the ready stae ready state. Do notte. Do not
disconnect the USB cable or turn OFF disconnect the USB cable or turn OFF the power switch of the computer until installing isthe power switch of the computer until installing is
completed.completed.
(5)(5) Turn Turn the mathe machine chine OFF and OFF and discodisconnect nnect the USB the USB cable.cable.
To Next Page
Loading...
