Brother DCP-1623W

4-84-8
 Confidential Confidential
NO DOCUNO DOCUMENT is dispMENT is displayed on the LCD alayed on the LCD and the machine rend the machine returns to the readturns to the readyy
state of maintenance mode when the document is not set in the ADF unit.state of maintenance mode when the document is not set in the ADF unit.
 
1.3.51.3.5 MonocMonochrome hrome image image qualiquality testy test patt pattern (tern (functfunction codion code: 09)e: 09)
<Function><Function>
This function is used This function is used to print various monochrome check patterns, to check print to print various monochrome check patterns, to check print quality andquality and
whether there are any missing images.whether there are any missing images.
<Operating Procedure><Operating Procedure>
(1(1)) NuNumemeriric kec key pay pad mod modedelsls
Press the [0] and [9] buttons in this order in the initial state of maintenance mode.Press the [0] and [9] buttons in this order in the initial state of maintenance mode.
Non-numeric key pad modelsNon-numeric key pad models
PrPresess ths the [e [ ] or ] or [[ ] bu] butttton ton to dio dispsplalay “My “MAIAINTENTENANANCNCE 09E 09” on ” on ththe LCe LCD anD and prd presess ths thee
[OK] button.[OK] button.
(2)(2) “PRINT“PRINTING” is diING” is displayesplayed on the LCDd on the LCD, and the mon, and the monochrome iochrome image qualmage quality tesity test pattert patternn
(refer to the figure below) is printed. When there is no paper in the paper tray, printing is(refer to the figure below) is printed. When there is no paper in the paper tray, printing is
cancelled.cancelled.
(3)(3) When priWhen printing is conting is completempleted, the machd, the machine returine returns to the inins to the initial sttial state of maiate of maintenancntenancee
mode.mode.
Print dataPrint data