1.3.211.3.21 Setting by Setting by country country (function code(function code: 74): 74)
<Function><Function>
This function is used to customize the machine according to language, function settings, andThis function is used to customize the machine according to language, function settings, and
worker switch settings.worker switch settings.
<Operating Procedure><Operating Procedure>
(1(1)) NuNumemeriric kec key pay pad mod modedelsls
Press the [7] and [4] buttons in this order in the initial state of maintenance mode.Press the [7] and [4] buttons in this order in the initial state of maintenance mode.
Non-numeric key pad modelsNon-numeric key pad models
PrPresess ths the [e [ ] or ] or [[ ] bu] butttton ton to dio dispsplalay “My “MAIAINTENTENANANCNCE 74E 74” on ” on ththe LCe LCD anD and prd presess ths thee
[OK] button.[OK] button.
(2)(2) The counThe country code cutry code currentlrrently set is dispy set is displayed on thlayed on the LCD. Entee LCD. Enter the countr the country code you wry code you wantant
to set.to set.
(3)(3) Press the [SPress the [Start] butttart] button. The new setton. The new setting is saved, aning is saved, and “PAd “PARAMETER INIRAMETER INIT” is displayT” is displayeded
on the LCD. Then the machine returns to the initial state of maintenance mode.on the LCD. Then the machine returns to the initial state of maintenance mode.
(4)(4) When the [SWhen the [Stop/Extop/Exit] button is preit] button is pressed durissed during settinng setting, the maching, the machine returns to the inie returns to the initialtial
state of maintenance mode without saving any changes that have been made.state of maintenance mode without saving any changes that have been made.
Setting by country code listSetting by country code list
<Models without fan><Models without fan>
Note:Note:
•• If there is If there is no entry for one no entry for one minute or longerminute or longer, the machine returns , the machine returns to the initial to the initial state ofstate of
maintenance mode automatically, regardless of the display status.maintenance mode automatically, regardless of the display status.
MMOODDEELL SSppeec c CCooddee SSppeec c CCoodde e ((DDeettaaiill))
DCP-1510DCP-1510
Australia/Australia/
New ZealandNew Zealand
00060006
- - --
BBeellggiiuumm 11000088
- - --
FFrraannccee 11000044 - - --
GGeerrmmaannyy 00005533
AustriaAustria 80148014
GGeerrmmaannyy 88000033
IIbbeerriiaa 11000044
- - --
IInnddoonneessiiaa 00004400
- - --
IIttaallyy 11000044 - - --
KKoorreeaa 00004400
- - --
MMaallaayyssiiaa 00004400
- - --
Middle East AndMiddle East And
North AfricaNorth Africa
00410041
- - --
NNeetthheerrllaannddss 11000044
- - --
PPaann--NNoorrddiicc 11000077
- - --
SSwwiittzzeerrllaanndd 11000044
- - --
TTaaiiwwaann 00002233
- - --
UUAAEE 00004411
- - --
UUKK 11000044
- - --
DCP-1510EDCP-1510E
CCEEEE--GGeenneerraall 11003377
- - --
PPoollaanndd 00003399
To Next Page
Loading...
