Error code 6101Error code 6101
The new toner sensor detected that the toner cartridge was not set.The new toner sensor detected that the toner cartridge was not set.
Cover is OpenCover is Open
Close the Top Cover.Close the Top Cover.
<User Check><User Check>
•• CloClose tse the the top cop coveoverr..
SStteepp CCaauussee RReemmeeddyy
11
Eject actuator caught inEject actuator caught in
sections of the machinesections of the machine
Reattach the eject actuator.Reattach the eject actuator.
22
The rib inside the top coverThe rib inside the top cover
(which presses the eject(which presses the eject
actuator) is brokenactuator) is broken
Replace the top cover ASSY.Replace the top cover ASSY.
33 EEjjeecct t sseennssoor r ffaaiilluurree RReeppllaacce e tthhe e eejjeecct t sseennssoor r PPCCB B AASSSSYY..
44
Paper feed/paper printingPaper feed/paper printing
position sensor PCB failureposition sensor PCB failure
Replace the paper feed/paper printing positionReplace the paper feed/paper printing position
sensor PCB ASSY.sensor PCB ASSY.
55 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
Cover is Open BDCover is Open BD
<User Check><User Check>
•• CloClose tse the the top cop coveoverr..
SStteepp CCaauussee RReemmeeddyy
11
Connection failure of the laserConnection failure of the laser
unit flat cableunit flat cable
Reconnect the laser unit flat cable.Reconnect the laser unit flat cable.
22
The rib inside the top coverThe rib inside the top cover
(which presses the laser shutter(which presses the laser shutter
arm boss) is brokenarm boss) is broken
Replace the top cover ASSY.Replace the top cover ASSY.
33
Faulty laser shutter arm of theFaulty laser shutter arm of the
laser unitlaser unit
Replace the laser unit.Replace the laser unit.
44 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
No TonerNo Toner
Open the Scanner Cover and Top Cover, then install the Open the Scanner Cover and Top Cover, then install the Toner Cartridge.Toner Cartridge.
<User Check><User Check>
•• Set the Set the toner toner cartridcartridge corge correctlyrectly..
SStteepp CCaauussee RReemmeeddyy
11
Connection failure of the motorConnection failure of the motor
encoder PCB flat cableencoder PCB flat cable
Reconnect the motor encoder PCB flat cable.Reconnect the motor encoder PCB flat cable.
22
Connection failure of the newConnection failure of the new
toner sensor PCB harnesstoner sensor PCB harness
Reconnect the new toner sensor PCB harness.Reconnect the new toner sensor PCB harness.
33 MMoottoor r eennccooddeer r PPCCB B ffaaiilluurree RReeppllaacce te thhe e mmoottoor r eennccooddeer r PPCCB B AASSSSYY..
44 NNeew w ttoonneer r sseennssoor r ffaaiilluurree RReeppllaacce e tthhe e nneew w ttoonneer r sseennssoor r PPCCB B AASSSSYY..
55 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..