Error code 7D00Error code 7D00
When the power switch was turned ON, the eject sensor detected paper pass.When the power switch was turned ON, the eject sensor detected paper pass.
(Cannot determine whether the top cover is open or whether it is a paper jam.)(Cannot determine whether the top cover is open or whether it is a paper jam.)
Error code 7E00Error code 7E00
Detected that multiple paper is fed five times in a row during receiving fax or printing list/Detected that multiple paper is fed five times in a row during receiving fax or printing list/
report.report.
Jam Inside 3Jam Inside 3
Remove the jammed paper, then press Start.Remove the jammed paper, then press Start.
<User Check><User Check>
•• CloClose tse the tohe top cop coverver..
•• RemRemove thove the jamme jammed paed paperper..
SStteepp CCaauussee RReemmeeddyy
11
Eject actuator caught inEject actuator caught in
sections of the machinesections of the machine
Reattach the eject actuator.Reattach the eject actuator.
22
Paper feed/paper printingPaper feed/paper printing
position sensor PCB failureposition sensor PCB failure
Replace the paper feed/paper printing positionReplace the paper feed/paper printing position
sensor PCB ASSY.sensor PCB ASSY.
33 EEjjeecct t sseennssoor r ffaaiilluurree RReeppllaacce e tthhe e eejjeecct t sseennssoor r PPCCB B AASSSSYY..
44 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
Jam TrayJam Tray
Remove the jammed paper from Tray, then press Start.Remove the jammed paper from Tray, then press Start.
<User Check><User Check>
•• RemRemove thove the jamme jammed paed paperper..
•• Check thaCheck that the paper is set in the pt the paper is set in the paper tray coraper tray correctlyrectly..
•• Check thaCheck that there is not too muct there is not too much paper set in the pah paper set in the paper trayper tray..
•• Check thaCheck that the thicknet the thickness of the paper is wiss of the paper is within the stthin the standardandard..
•• Check thaCheck that the size ot the size of the papef the paper is withir is within the stann the standard.dard.
•• Flip throFlip through the paugh the paper and resper and reset it in the paet it in the paper trayper tray..
SStteepp CCaauussee RReemmeeddyy
11 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
To Next Page
Loading...
