Brother DCP-1623W - Page 58

1-421-42
 Confidential Confidential
 

Error code BD00Error code BD00
A black level not within the standard was scanned when function code 55 was executed.A black level not within the standard was scanned when function code 55 was executed.

Error code C700Error code C700
There is insufficient memory to expand PC print data.There is insufficient memory to expand PC print data.

Error code D100Error code D100
An error occurred while initializing the modem.An error occurred while initializing the modem.

Error code D200Error code D200
Detected that the modem PCB is not connected.Detected that the modem PCB is not connected.
Scanner ErrorScanner Error
<User Check><User Check>
•• Remove Remove the papthe paper jammeer jammed insid inside the made the machine.chine.
SStteepp CCaauussee RReemmeeddyy
11 CCIIS S uunniit t ffaaiilluurree RReeppllaacce e tthhe e CCIIS S uunniitt..
22 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
Out of MemoryOut of Memory
Press Stop KeyPress Stop Key
<User Check><User Check>
•• Print thPrint the print de print data stata stored in tored in the memohe memoryry..
•• Divide tDivide the print dahe print data and prita and print them sepnt them separatelyarately..
SStteepp CCaauussee RReemmeeddyy
11 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
Print Unable D1Print Unable D1
Turn the power off and Turn the power off and then back on again.then back on again.
SStteepp CCaauussee RReemmeeddyy
11
Connection failure of theConnection failure of the
modem PCB flat cablemodem PCB flat cable
Reconnect the modem PCB flat cable.Reconnect the modem PCB flat cable.
22 MMooddeem m PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmooddeem m PPCCB B AASSSSYY..
33 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..
Machine ErrorMachine Error
Unplug machine, then call Brother.Unplug machine, then call Brother.
SStteepp CCaauussee RReemmeeddyy
11
Connection failure of theConnection failure of the
modem PCB flat cablemodem PCB flat cable
Reconnect the modem PCB flat cable.Reconnect the modem PCB flat cable.
22 MMooddeem m PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmooddeem m PPCCB B AASSSSYY..
33 MMaaiin n PPCCB B ffaaiilluurree RReeppllaacce e tthhe e mmaaiin n PPCCB B AASSSSYY..