Brother DCP 585CW - Color Inkjet - All-in-One - Page 109

Control panel setup
99
6
i Enter the account password for SMTP authentication.
Press OK.
j Enter the account password again.
Press OK.
k Press Stop/Exit.
POP3 Server
6
This field displays the node name or IP address of the POP3 server (incoming E-mail server) used by the
Brother machine. This address is necessary for the Internet fax features to function correctly.
(Ex, “mailhost.brothermail.net” or “192.000.000.001”)
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose POP3 Server.
Press OK.
f Press a or b to choose Name or IP Address.
Press OK.
g Enter the POP3 server name or IP address.
Press OK.
h Press Stop/Exit.
For Touchscreen models
6
a Press MENU.
b Press a or b to choose Network.
c Press a or b to choose E-mail/IFAX.
d Press a or b to choose Setup Server.
e Press a or b to choose POP3 Server.
f Choose Name (your POP3 server name) or IP Address.
g Enter the POP3 server name or IP address.
Press OK.
h Press Stop/Exit.