Brother DCP 585CW - Color Inkjet - All-in-One - Page 108

Control panel setup
98
6
Auth. for SMTP 6
You can specify the security method for E-mail notification. For details on security methods for E-mail
notification, see Security methods for E-mail notification on page 153.
a Press Menu.
b Press a or b to choose Network.
Press OK.
c Press a or b to choose E-mail/IFAX.
Press OK.
d Press a or b to choose Setup Server.
Press OK.
e Press a or b to choose Auth. for SMTP.
Press OK.
f Press a or b to choose None, SMTP-AUTH or POP bef.SMTP.
Press OK.
g If you chose None or POP bef.SMTP in f, go to k.
If you chose SMTP-AUTH in f, go to h.
h Enter the account name for SMTP authentication.
Press OK.
i Enter the account password for SMTP authentication.
Press OK.
j Enter the account password again.
Press OK.
k Press Stop/Exit.
For Touchscreen models
6
a Press MENU.
b Press a or b to choose Network.
c Press a or b to choose E-mail/IFAX.
d Press a or b to choose Setup Server.
e Press a or b to choose Auth. for SMTP.
f Press None, SMTP-AUTH or POP bef.SMTP.
g If you chose None or POP bef.SMTP in f, go to k.
If you chose SMTP-AUTH in f, go to h.
h Enter the account name for SMTP authentication.
Press OK.