Brother DCP 585CW - Color Inkjet - All-in-One - Page 188

Appendix B
178
B
 The factory settings are shown in bold.
1
On connection to the network, the machine will automatically set the IP address and Subnet Mask to value appropriate for your network.
2
The LDAP protocol is not supported for China.
Network
(Continued)
Scan to FTP
(MFC
-5890CN,
MFC
-6490CW
and
MFC-6890CDW
only)
Passive Mode On/Off
Port Number 21 [00001-65535]
File Name1 — (Up to 15 characters)
File Name2 — (Up to 15 characters)
Setup Profile Not Registered (Up to 30 characters)
Not Registered (Up to 30 characters)
Not Registered (Up to 30 characters)
Not Registered (Up to 30 characters)
Not Registered (Up to 30 characters)
Time Zone UTC
xxxx:xx
Network I/F Wired LAN
/WLAN
LDAP
2
(MFC-6890CDW
only)
On/Off
Factory Reset Yes/No
Level1 Level2 Level3 Options1 Options2