Brother DCP-7040 - Page 90

82
Main Menu Submenu Menu Selections Options Descriptions Page
4.LAN
(DCP-7045N
only)
1.TCP/IP 1.Boot method — Auto*
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method
that best suits
your needs.
See
Network
User’s
Guide on
the
CD-ROM.
2.IP Address — [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP
address.
3.Subnet Mask — [000-255].
[000-255].
[000-255].
[000-255]
Enter the
Subnet mask.
4.Gateway — [000-255].
[000-255].
[000-255].
[000-255]
Enter the
Gateway
address.
5.Node Name — BRN
XXXXXXXXXXXX
Confirm the
Node name.
6.WINS Config — Auto*
Static
Chooses the
WINS
configuration
mode.
7.WINS Server —(Primary)
000.000.000.
000
(Secondary)
000.000.000.
000
Specifies the IP
address of the
primary or
secondary
WINS server.
8.DNS Server —(Primary)
000.000.000.
000
(Secondary)
000.000.000.
000
Specifies the IP
address of the
primary or
secondary DNS
server.
9.APIPA — On*
Off
Automatically
allocates the IP
address from
the link-local
address range.
The factory settings are shown in Bold with an asterisk.