Why won't my Brother DCP 7065DN All in One Printer print double-sided?
If your Brother All in One Printer isn't printing on both sides of the paper even with Duplex enabled, check the paper size setting in the printer driver.
What does 'Replace Toner' mean on my Brother DCP 7065DN All in One Printer?
The 'Replace Toner' message on your Brother All in One Printer means the machine will stop printing until you replace the toner cartridge. If you have set the Toner setting to Stop, replace the toner cartridge with a new and unused genuine Brother toner cartridge. This will reset the Replace Toner mode.
What does 'Toner Low' mean on my Brother DCP 7065DN All in One Printer?
The 'Toner Low' message on your Brother All in One Printer indicates that you will need to replace the toner cartridge soon. It's a good idea to buy a new toner cartridge before you get a 'Replace Toner' message.
What to do when my Brother All in One Printer says 'Toner Ended'?
When your Brother All in One Printer displays 'Toner Ended', it means it's time to replace the toner cartridge with a new one.
Why is Duplex Disabled on my Brother DCP 7065DN All in One Printer?
If duplex is disabled on your Brother All in One Printer, it could be because the duplex tray is removed or not properly installed. Carefully put the duplex tray into the machine until it clicks into place. Also, it can happen if the back of the machine is not closed completely. Close the back cover of the machine.
What to do if Brother DCP-7065DN All in One Printer displays 'Cover is Open'?
If your Brother DCP-7065DN All in One Printer displays a 'Cover is Open' message, it means the ADF cover is not completely closed. Close the ADF cover of the machine.
How to fix 'Init Unable XX' error on Brother All in One Printer?
An 'Init Unable XX' error on your Brother All in One Printer indicates a mechanical problem. Disconnect the machine from the power for several minutes and then reconnect it. If the problem continues, no answer.
How to fix 'Print Unable XX' error on Brother All in One Printer?
A 'Print Unable XX' error on your Brother All in One Printer indicates a mechanical problem. Disconnect the machine from the AC power outlet for several minutes, then reconnect it. If the problem continues, no answer.
What should I do if my Brother DCP 7065DN says 'No Toner'?
If your Brother All in One Printer displays 'No Toner', the toner cartridge is not installed correctly. Pull out the drum unit, take out the toner cartridge, and then put it back into the drum unit.
Why does my Brother All in One Printer say 'Cooling Down, Wait for a while'?
If your Brother All in One Printer displays 'Cooling Down, Wait for a while', it means the drum unit or toner cartridge is too hot, and the machine has paused to cool down. Make sure you can hear the fan spinning and that the exhaust outlet isn't blocked. If the fan is spinning, remove any obstacles around the exhaust outlet and let the machine sit for several minutes. If the fan isn't spinning, disconnect the machine from the power outlet for several minutes, then reconnect it.
Explains who is covered, what is covered, warranty periods, and exclusions.
Outlines the steps to follow for warranty service and what Brother will do.
Step-by-step guide for loading paper into the standard paper tray.
How to use the manual feed slot for envelopes, labels, and thicker paper.
How to load documents into the ADF for copying or scanning.
Instructions for placing documents directly on the scanner glass.
Step-by-step guide for performing a copy operation.
Process for sending documents from a computer to the printer.
Detailed guide on using ControlCenter4 for scanning to a PC.
Step-by-step instructions for replacing the toner cartridge.
Step-by-step instructions for replacing the drum unit.
Explains common error messages and their causes/actions.
General| Dimensions (WxDxH) | 405 x 399 x 316 mm |
|---|---|
| All-in-one functions | Copy, Print, Scan |
| Color all-in-one functions | Scan |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Duplex printing mode | Auto |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 27 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Digital sender | No |
| Maximum duty cycle | - pages per month |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 26 cpm |
| Scan to | E-mail, File, Image, OCR |
| Scanner type | Flatbed & ADF scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Maximum scan area | 216 x 356 mm |
| Output color depth | 24 bit |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Multi-Purpose tray input capacity | 1 sheets |
| Auto document feeder (ADF) input capacity | 35 sheets |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Labels, Plain paper, Recycled paper |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Standard interfaces | Ethernet, USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Internal memory | 32 MB |
| Processor family | ARM |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Package weight | 14.600 g |
| Sustainability certificates | ENERGY STAR |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
To Next Page
