EasyManua.ls Logo

Brother DCP-7060D - User Manual

Brother DCP-7060D
224 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SOFTWARE
USER’S GUIDE
Not all models are available in all
countries.
For DCP users; This documentation is for
both MFC and DCP models. Where it
says ‘MFC’ in this user’s guide, please
read ‘MFC’ as ‘DCP’.
Version A
UK

Table of Contents

Other manuals for Brother DCP-7060D

Preview: Service Manual
Service Manual343 pages
Preview: User Guide
User Guide157 pages
Preview: Basic User's Guide
Basic User's Guide115 pages
Preview: Advanced User's Guide
Advanced User's Guide24 pages
Preview: Quick Setup Guide
Quick Setup Guide19 pages

Questions and Answers

  • A
    Alex LynchAug 30, 2025
    How to fix a 'Jam Inside' error on Brother DCP-7060D?
    • I
      iandrewsAug 30, 2025
      If your Brother All in One Printer displays 'Jam Inside', leave the machine for a few minutes to cool down, open the front cover, slowly take out the drum unit and toner cartridge assembly. The jammed paper may be pulled out with the drum unit and toner cartridge assembly, or this may release the paper so you can pull it out of the inside of the machine. If you cannot remove the drum unit and toner cartridge assembly easily, do not use extra force. Instead, push down the green lock lever and take the toner cartridge out of the drum unit. Clear the jammed paper if there is any inside the drum unit.
  • C
    Caleb BoydAug 25, 2025
    How to resolve 'Cartridge Error' on Brother Printer?
    • T
      Tracy PerezAug 25, 2025
      If you are getting a 'CARTRIDGE ERROR' on your Brother printer, make sure that the drum unit and toner cartridge assembly is installed properly.
  • V
    Vanessa StephensSep 23, 2025
    What to do if my Brother All in One Printer displays 'Manual Feed'?
    • B
      Brooke CunninghamSep 23, 2025
      If your Brother All in One Printer displays 'Manual Feed', it means Manual Feed was selected as the paper source when there was no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
  • D
    Douglas DixonSep 2, 2025
    Why does my Brother Printer say 'No Paper T1'?
    • M
      Megan RogersSep 2, 2025
      If your Brother printer displays a 'No Paper T1' error, it could be due to several reasons. The paper tray might be empty or not correctly installed; if it’s empty, add a new stack of paper and press Go. Even if there is paper, ensure it is straight and not curled—straighten if necessary. Try removing the paper, turning the stack over, and placing it back in the tray. Reduce the amount of paper in the tray. Also, verify that the paper meets Brother’s recommended specifications and that you've loaded the same size paper selected in the driver settings. If the problem persists, the paper pick-up roller may be dirty and needs cleaning.
  • A
    Adam WrightSep 6, 2025
    What does a 'Fuser Error' mean on my Brother Printer?
    • P
      pollardjohnSep 6, 2025
      If your Brother printer displays 'Fuser Error', it means the temperature of the fuser unit isn't rising to the correct temperature within the specified time. Turn the power off, wait a few seconds, and then turn it back on. Leave the machine on for 15 minutes.
  • K
    kimberlyperryAug 31, 2025
    What to do if my Brother DCP-7060D won't turn on?
    • S
      Steve ParkerSep 1, 2025
      If your Brother All in One Printer doesn't turn on, it might be due to adverse conditions on the power connection. Turn the machine off and unplug the power cord. Wait for ten minutes, then plug in the power cord and turn the machine on. If that doesn't work, try plugging the power cord into a different, known working outlet.
  • D
    Dustin FranklinAug 28, 2025
    How to fix cartridge error on Brother DCP-7060D All in One Printer?
    • H
      Heather LandryAug 28, 2025
      A cartridge error on your Brother All in One Printer often means the toner cartridge isn't correctly installed. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
  • S
    sanchezbrianSep 8, 2025
    How to resolve 'Fuser Error' on a Brother Printer?
    • T
      Tina LewisSep 8, 2025
      If your Brother printer shows a 'Fuser Error', turn the power off, wait a few seconds, and then turn it back on. Leave the machine on for 15 minutes.
  • N
    Nicole WilliamsSep 4, 2025
    What does 'Toner Low' mean on my Brother Printer?
    • M
      Mary MoralesSep 4, 2025
      If your Brother printer is indicating 'TONER LOW', buy a new toner cartridge and have it ready for when the 'REPLACE TONER' status is indicated.
  • X
    xmullinsAug 27, 2025
    Why does my Brother Printer say 'Replace Toner'?
    • B
      bruizAug 27, 2025
      The 'Replace Toner' message on your Brother printer means it's time to replace the toner cartridge. If the Toner setting is set to Stop, replace the toner cartridge with a new and unused original Brother toner cartridge. This will reset the Replace Toner mode.

Brother DCP-7060D Specifications

General IconGeneral
Dimensions (WxDxH)405 x 399 x 268 mm
All-in-one functionsCopy, Print, Scan
Color all-in-one functionsScan
Print technologyLaser
Maximum resolution2400 x 600 DPI
Economical printingYes
Time to first page (black, normal)9 s
Print speed (black, normal quality, A4/US Letter)24 ppm
Duplex print speed (black, normal quality, A4/US Letter)5 ppm
Digital senderNo
Maximum duty cycle- pages per month
Copier resize25 - 400 %
Maximum copy resolution600 x 600 DPI
Maximum number of copies99 copies
N-in-1 copy function (N=)2, 4
Time to first copy (black, normal)11 s
Copy speed (black, normal quality, A4)24 cpm
Scan toE-mail, Image, OCR
Scanner typeFlatbed scanner
Grayscale levels256
Input color depth48 bit
Output color depth24 bit
Scan speed (black)2.63 ppm
Image formats supportedBMP, JPG, TIF
Maximum scan resolution19200 x 19200 DPI
Optical scanning resolution600 x 2400 DPI
Total input capacity250 sheets
Total output capacity100 sheets
Multi-Purpose tray input capacity1 sheets
Custom media width76.2 - 216 mm
Maximum print size216 x 406 mm
Custom media length116 - 406.4 mm
Paper tray media typesBond paper, Plain paper, Recycled paper
Paper tray media weight60 - 105 g/m²
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Multi-purpose tray media typesBond paper, Envelopes, Heavyweight paper, Plain paper, Recycled paper
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
DisplayLCD
Market positioningHome & office
Display number of lines2 lines
Display number of characters16
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
Processor familyARM
Sound power level (standby)30 dB
Sound pressure level (printing)53 dB
AC input frequency50 - 60 Hz
Power consumption (standby)55 W
Power consumption (PowerSave)0.9 W
Power consumption (average operating)445 W
Sustainability certificatesENERGY STAR
Package weight13.200 g
Mac operating systems supportedMac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Windows operating systems supportedWindows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64

Related product manuals