How to solve fuser error on Brother DCP-7060D?
A 'Fuser Error' on your Brother All in One Printer indicates that the fuser unit's temperature isn't rising correctly. Turn the printer off, wait a few seconds, and then turn it back on. Leave the machine powered on for 15 minutes.
How to fix Brother Printer 'Duplex Disabled' error?
If your Brother printer says 'Duplex Disabled', the duplex tray is either removed or not correctly installed. Carefully put the duplex tray into the machine until it clicks into place.
How do I fix a 'Drum Error' on my Brother Printer?
If your Brother printer displays 'Drum Error', it means the corona wire on the drum unit needs to be cleaned. Clean the corona wire on the drum unit.
How to fix cartridge error on Brother DCP-7060D All in One Printer?
A cartridge error on your Brother All in One Printer often means the toner cartridge isn't correctly installed. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall it into the drum unit.
What to do if Brother All in One Printer says no paper?
If your Brother All in One Printer displays a 'No Paper' error, it means the printer is out of paper or the paper isn't correctly loaded. Refill the paper in the paper tray and press Start, or remove the paper and load it again, then press Start. If the issue continues, the paper pick-up roller may need cleaning.
What does toner low mean on Brother DCP-7060D All in One Printer?
When your Brother All in One Printer shows 'Toner Low', it means you'll need to replace the toner cartridge soon. Purchase a new toner cartridge before you get a 'Replace Toner' message.
What to do if my Brother All in One Printer displays 'Manual Feed'?
If your Brother All in One Printer displays 'Manual Feed', it means Manual Feed was selected as the paper source when there was no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
What to do if my Brother All in One Printer DCP-7065DN says 'Cover is Open'?
If your Brother All in One Printer DCP-7065DN displays 'Cover is Open', it means the ADF cover is not completely closed. Close the ADF cover of the machine.
How to fix 'Cartridge Error' on Brother DCP-7060D?
If your Brother All in One Printer displays a 'Cartridge Error', it means the toner cartridge isn't installed correctly. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall the toner cartridge back into the drum unit.
How to resolve 'Fuser Error' on a Brother Printer?
If your Brother printer shows a 'Fuser Error', turn the power off, wait a few seconds, and then turn it back on. Leave the machine on for 15 minutes.
General| Dimensions (WxDxH) | 405 x 399 x 268 mm |
|---|---|
| All-in-one functions | Copy, Print, Scan |
| Color all-in-one functions | Scan |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Digital sender | No |
| Maximum duty cycle | - pages per month |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Scan to | E-mail, Image, OCR |
| Scanner type | Flatbed scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Scan speed (black) | 2.63 ppm |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Multi-Purpose tray input capacity | 1 sheets |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Plain paper, Recycled paper |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Processor family | ARM |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Package weight | 13.200 g |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
| Windows operating systems supported | Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
To Next Page