Brother DCP-7060D - Test Print (for DCP-7070 DW and MFC-7860 DW); Duplex Print (for DCP-7070 DW and MFC-7860 DW)

Using the control panel
5
1
Test Print (For DCP-7070DW and MFC-7860DW) 1
If you are having problems with print quality, you can do a test print.
a Press Menu.
b Press a or b to choose Printer. Press OK.
c Press a or b to choose Print Options. Press OK.
d Press a or b to choose Test Print. Press OK.
e Press Start.
f Press Stop/Exit.
Note
If the problem appears on the printout, see Improving the print quality in the Basic User's Guide.
Duplex Print (For DCP-7070DW and MFC-7860DW) 1
You can choose whether you want to automatically print on both sides of the paper. The setting in the printer
driver will take priority over the setting made on the control panel.
a Press Menu.
b Press a or b to choose Printer. Press OK.
c Press a or b to choose Duplex. Press OK.
d Press a or b to choose Off, On(Long Edge) or On(Short Edge). Press OK.
e Press Stop/Exit.
Note
If the problem appears on the printout, see Improving the print quality in the Basic User's Guide.