Brother DCP-7060D - User Manual

Other manuals for Brother DCP-7060D

Service Manual343 pages

User Guide157 pages

Basic User's Guide115 pages

Advanced User's Guide24 pages

Quick Setup Guide19 pages

Questions and Answers:

C
Catherine HillSep 18, 2025
What does 'Cover is Open' mean on Brother DCP-7060D All in One Printer and how to fix it?
- G
  Gabriella WhitakerSep 18, 2025
  The 'Cover is Open' error on your Brother All in One Printer indicates that either the front cover or the fuser cover is not completely closed, or paper was jammed in the back when you turned on the power. Make sure you close the corresponding cover. Also, ensure no paper is jammed inside the back of the machine, then close the fuser cover and press Start.
R
rileykatieSep 14, 2025
Why does my Brother DCP-7060D All in One Printer say 'No Toner'?
- M
  Michelle MitchellSep 14, 2025
  If your Brother All in One Printer displays 'No Toner', it indicates that the toner cartridge is not installed correctly. Pull out the drum unit, take out the toner cartridge, and then put it back into the drum unit.
A
andersoncarolineAug 31, 2025
What to do if Brother DCP-7060D shows 'Replace Toner'?
- C
  Christopher IrwinAug 31, 2025
  If your Brother All in One Printer shows 'Replace Toner', the machine will stop printing until you replace the toner cartridge. Replace the toner cartridge with a new and unused original Brother toner cartridge. This will reset the Replace Toner mode.
J
jeffrey67Aug 30, 2025
What to do if Brother DCP-7060D says 'Replace Drum'?
- L
  Lauren DyerAug 30, 2025
  If your Brother All in One Printer displays 'Replace Drum', it indicates that it is time to replace the drum unit or the drum unit counter was not reset when a new drum was installed. You should replace the drum unit or reset the drum unit counter.
J
Jennifer WilkinsAug 30, 2025
What to do if my Brother DCP-7060D All in One Printer will not turn on?
- K
  kcummingsAug 30, 2025
  If your Brother All in One Printer will not turn on, adverse conditions on the power connection (such as lightning or a power surge) may have triggered the machine’s internal safety mechanisms. Turn the machine off and unplug the power cord. Wait for ten minutes, then plug in the power cord and turn the machine on. If the problem is not solved, turn off the machine. Plug the power cord into a different known working outlet and turn on the machine.
J
Jeffrey BoydAug 30, 2025
How do I clear a paper jam in the duplex tray of my Brother DCP-7060D All in One Printer?
- G
  Gary NelsonAug 30, 2025
  If the LCD of your Brother All in One Printer shows 'Jam Duplex', leave the machine for a few minutes to cool down. Pull the duplex tray completely out of the machine. Pull the jammed paper out of the machine or the duplex tray. Make sure that no paper remains under the machine. Put the duplex tray back in the machine.
A
Alex LynchAug 30, 2025
How to fix a 'Jam Inside' error on Brother DCP-7060D?
- I
  iandrewsAug 30, 2025
  If your Brother All in One Printer displays 'Jam Inside', leave the machine for a few minutes to cool down, open the front cover, slowly take out the drum unit and toner cartridge assembly. The jammed paper may be pulled out with the drum unit and toner cartridge assembly, or this may release the paper so you can pull it out of the inside of the machine. If you cannot remove the drum unit and toner cartridge assembly easily, do not use extra force. Instead, push down the green lock lever and take the toner cartridge out of the drum unit. Clear the jammed paper if there is any inside the drum unit.
R
Robert ZhangSep 13, 2025
What to do if my Brother DCP-7060D All in One Printer says 'No Paper'?
- A
  Amy HardingSep 13, 2025
  If your Brother All in One Printer displays a 'No Paper' error, it means the machine is out of paper or the paper isn't loaded correctly. Refill the paper in the paper tray, or remove the paper and load it again.
J
jesse62Sep 18, 2025
What to do if my Brother DCP-7060D displays 'Cover is Open' and paper was jammed?
- M
  Marc DoyleSep 18, 2025
  If your Brother All in One Printer displays 'Cover is Open' and paper was jammed in the back of the machine when you turned on the power, close the fuser cover of the machine. Make sure paper is not jammed inside the back of the machine, and then close the fuser cover and press Start.
J
joelcoxSep 23, 2025
Why does my Brother All in One Printer say 'Cartridge Error'?
- D
  davidtuckerSep 23, 2025
  A 'Cartridge Error' message on your Brother All in One Printer indicates that the toner cartridge is not installed correctly. To resolve this, pull out the drum unit, remove the toner cartridge, and then re-install the toner cartridge into the drum unit.

Brother DCP-7060D Specifications

General

Dimensions (WxDxH)	405 x 399 x 268 mm
All-in-one functions	Copy, Print, Scan
Color all-in-one functions	Scan
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Economical printing	Yes
Time to first page (black, normal)	9 s
Print speed (black, normal quality, A4/US Letter)	24 ppm
Duplex print speed (black, normal quality, A4/US Letter)	5 ppm
Digital sender	No
Maximum duty cycle	- pages per month
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
N-in-1 copy function (N=)	2, 4
Time to first copy (black, normal)	11 s
Copy speed (black, normal quality, A4)	24 cpm
Scan to	E-mail, Image, OCR
Scanner type	Flatbed scanner
Grayscale levels	256
Input color depth	48 bit
Output color depth	24 bit
Scan speed (black)	2.63 ppm
Image formats supported	BMP, JPG, TIF
Maximum scan resolution	19200 x 19200 DPI
Optical scanning resolution	600 x 2400 DPI
Total input capacity	250 sheets
Total output capacity	100 sheets
Multi-Purpose tray input capacity	1 sheets
Custom media width	76.2 - 216 mm
Maximum print size	216 x 406 mm
Custom media length	116 - 406.4 mm
Paper tray media types	Bond paper, Plain paper, Recycled paper
Paper tray media weight	60 - 105 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Multi-purpose tray media types	Bond paper, Envelopes, Heavyweight paper, Plain paper, Recycled paper
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	60 - 163 g/m²
Display	LCD
Market positioning	Home & office
Display number of lines	2 lines
Display number of characters	16
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Processor family	ARM
Sound power level (standby)	30 dB
Sound pressure level (printing)	53 dB
AC input frequency	50 - 60 Hz
Power consumption (standby)	55 W
Power consumption (PowerSave)	0.9 W
Power consumption (average operating)	445 W
Sustainability certificates	ENERGY STAR
Package weight	13.200 g
Mac operating systems supported	Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Windows operating systems supported	Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64