Why is duplex disabled on my Brother All in One Printer?
If 'Duplex Disabled' appears on your Brother All in One Printer, it means the duplex tray is either removed or not correctly installed. Make sure to carefully put the duplex tray into the machine until it clicks into place. Also, ensure that the back of the machine is completely closed.
How to fix out of memory error on Brother DCP-7060D?
If your Brother All in One Printer shows 'Out of Memory', the machine’s memory is full. You can press Start to copy the scanned pages, or press Stop/Exit and wait for other operations to finish before trying again. Reducing the print resolution may also help.
How to solve fuser error on Brother DCP-7060D?
A 'Fuser Error' on your Brother All in One Printer indicates that the fuser unit's temperature isn't rising correctly. Turn the printer off, wait a few seconds, and then turn it back on. Leave the machine powered on for 15 minutes.
What is drum error on Brother All in One Printer?
A 'Drum Error' on your Brother All in One Printer means the corona wire on the drum unit needs cleaning. Clean the corona wire on the drum unit.
What does EL error mean on Brother All in One Printer?
If your Brother All in One Printer displays an 'EL Error', the machine has a mechanical problem. Open the front cover and close it again.
What does size error DX mean on Brother DCP-7060D?
If your Brother All in One Printer displays 'Size Error DX', the paper in the tray isn't suitable for automatic duplex printing. Load A4 paper for automatic duplex printing, and then press Start.
What does drum stop mean on Brother DCP-7060D All in One Printer?
The message 'Drum Stop' on your Brother All in One Printer indicates that it is time to replace the drum unit.
What to do if cover is open on Brother DCP-7060D DCP-7065DN?
If your Brother All in One Printer DCP-7065DN displays 'Cover is Open', the ADF cover is not completely closed. Close the ADF cover of the machine.
What does init unable XX mean on Brother All in One Printer?
If your Brother All in One Printer displays 'Init Unable XX', the machine has a mechanical problem. Disconnect the machine from the power for several minutes and then reconnect it.
What to do if my Brother DCP-7060D All in One Printer says 'No Paper'?
If your Brother All in One Printer displays a 'No Paper' error, it means the machine is out of paper or the paper isn't loaded correctly. Refill the paper in the paper tray, or remove the paper and load it again.
General| Dimensions (WxDxH) | 405 x 399 x 268 mm |
|---|---|
| All-in-one functions | Copy, Print, Scan |
| Color all-in-one functions | Scan |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Digital sender | No |
| Maximum duty cycle | - pages per month |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Scan to | E-mail, Image, OCR |
| Scanner type | Flatbed scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Scan speed (black) | 2.63 ppm |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Multi-Purpose tray input capacity | 1 sheets |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Plain paper, Recycled paper |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Processor family | ARM |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Package weight | 13.200 g |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
| Windows operating systems supported | Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
To Next Page