How to resolve a cartridge error on my Brother DCP-7060D?
A cartridge error on your Brother All in One Printer typically means the toner cartridge isn't installed correctly. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall the toner cartridge in the drum unit.
What to do if my Brother DCP-7060D says 'Cover is Open'?
If your Brother All in One Printer shows 'Cover is Open', it means the front cover is not completely closed. Make sure to close the front cover of the machine.
Why does my Brother DCP-7060D All in One Printer say 'No Toner'?
If your Brother All in One Printer displays 'No Toner', it indicates that the toner cartridge is not installed correctly. Pull out the drum unit, take out the toner cartridge, and then put it back into the drum unit.
What does 'Cooling Down Wait for a while' mean on my Brother All in One Printer?
The 'Cooling Down Wait for a while' message on your Brother All in One Printer means the temperature of the drum unit or toner cartridge is too hot. Make sure that you can hear the fan in the machine spinning and that the exhaust outlet is not blocked by something. If the fan is spinning, remove any obstacles that surround the exhaust outlet, and then leave the machine turned on but do not use it for several minutes. If the fan is not spinning, disconnect the machine from the power for several minutes then reconnect it.
How to fix 'Out of Memory' error on Brother All in One Printer?
If your Brother All in One Printer displays an 'Out of Memory' error, it means the machine’s memory is full. You can press Start to copy the scanned pages (copy operation in progress), or press Stop/Exit and wait until the other operations in progress finish, and then try again. You can also reduce print resolution.
What does 'Toner Low' mean on my Brother All in One Printer?
The 'Toner Low' message on your Brother All in One Printer indicates that you will need to replace the toner cartridge soon. Buy a new toner cartridge before you get a Replace Toner message.
How do I resolve a 'Fuser Error' on my Brother DCP-7060D All in One Printer?
If you encounter a 'Fuser Error' on your Brother All in One Printer, it means the temperature of the fuser unit does not rise to a specified temperature within the specified time. Turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine for 15 minutes with the power turned on.
What to do if my Brother All in One Printer DCP-7065DN says 'Cover is Open'?
If your Brother All in One Printer DCP-7065DN displays 'Cover is Open', it means the ADF cover is not completely closed. Close the ADF cover of the machine.
What does 'Size Error DX' mean on my Brother DCP-7060D?
The 'Size Error DX' message on your Brother All in One Printer means the paper in the tray is not a suitable size for automatic duplex printing. Load A4 paper for automatic duplex printing, and then press Start.
What to do if my Brother DCP-7060D displays 'Cover is Open' while loading a document?
If your Brother All in One Printer shows 'Cover is Open' while loading a document, it means the ADF is open. Close the ADF cover of the machine, then press Stop/Exit.
General| Dimensions (WxDxH) | 405 x 399 x 268 mm |
|---|---|
| All-in-one functions | Copy, Print, Scan |
| Color all-in-one functions | Scan |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Digital sender | No |
| Maximum duty cycle | - pages per month |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Scan to | E-mail, Image, OCR |
| Scanner type | Flatbed scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Scan speed (black) | 2.63 ppm |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Multi-Purpose tray input capacity | 1 sheets |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Plain paper, Recycled paper |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Processor family | ARM |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Package weight | 13.200 g |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
| Windows operating systems supported | Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
To Next Page