What to do if my Brother All in One Printer displays 'Manual Feed'?
If your Brother All in One Printer displays 'Manual Feed', it means Manual Feed was selected as the paper source when there was no paper in the manual feed slot. Place a sheet of paper in the manual feed slot.
What to do if Brother Printer shows 'Out of Memory'?
If your Brother printer displays an 'Out of Memory' message, it means the machine’s memory is full. You can either press Start to copy the scanned pages, or press Stop/Exit and wait for other operations to finish before trying again. Reducing the print resolution can also help.
Why does my Brother Printer say 'Replace Toner'?
The 'Replace Toner' message on your Brother printer means it's time to replace the toner cartridge. If the Toner setting is set to Stop, replace the toner cartridge with a new and unused original Brother toner cartridge. This will reset the Replace Toner mode.
What does 'Toner Ended' mean on Brother DCP-7060D All in One Printer?
If your Brother All in One Printer displays 'Toner Ended', it means it is time to replace the toner cartridge with a new one.
Why does my Brother Printer say 'No Paper T1'?
If your Brother printer displays a 'No Paper T1' error, it could be due to several reasons. The paper tray might be empty or not correctly installed; if it’s empty, add a new stack of paper and press Go. Even if there is paper, ensure it is straight and not curled—straighten if necessary. Try removing the paper, turning the stack over, and placing it back in the tray. Reduce the amount of paper in the tray. Also, verify that the paper meets Brother’s recommended specifications and that you've loaded the same size paper selected in the driver settings. If the problem persists, the paper pick-up roller may be dirty and needs cleaning.
What does 'Toner Low' mean on my Brother Printer?
If your Brother printer is indicating 'TONER LOW', buy a new toner cartridge and have it ready for when the 'REPLACE TONER' status is indicated.
How to resolve a cartridge error on my Brother DCP-7060D?
A cartridge error on your Brother All in One Printer typically means the toner cartridge isn't installed correctly. To fix this, pull out the drum unit, remove the toner cartridge, and then reinstall the toner cartridge in the drum unit.
How to fix out of memory error on Brother DCP-7060D?
If your Brother All in One Printer shows 'Out of Memory', the machine’s memory is full. You can press Start to copy the scanned pages, or press Stop/Exit and wait for other operations to finish before trying again. Reducing the print resolution may also help.
What does 'EL Error' mean on Brother All in One Printer?
If your Brother All in One Printer displays 'EL Error', it means the machine has a mechanical problem. Open the front cover and close it again.
What to do if my Brother Printer says 'No Toner'?
If your Brother printer is displaying a 'NO TONER' message, open the front cover and install the toner cartridge.
General| Dimensions (WxDxH) | 405 x 399 x 268 mm |
|---|---|
| All-in-one functions | Copy, Print, Scan |
| Color all-in-one functions | Scan |
| Print technology | Laser |
| Maximum resolution | 2400 x 600 DPI |
| Economical printing | Yes |
| Time to first page (black, normal) | 9 s |
| Print speed (black, normal quality, A4/US Letter) | 24 ppm |
| Duplex print speed (black, normal quality, A4/US Letter) | 5 ppm |
| Digital sender | No |
| Maximum duty cycle | - pages per month |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 600 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Time to first copy (black, normal) | 11 s |
| Copy speed (black, normal quality, A4) | 24 cpm |
| Scan to | E-mail, Image, OCR |
| Scanner type | Flatbed scanner |
| Grayscale levels | 256 |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Scan speed (black) | 2.63 ppm |
| Image formats supported | BMP, JPG, TIF |
| Maximum scan resolution | 19200 x 19200 DPI |
| Optical scanning resolution | 600 x 2400 DPI |
| Total input capacity | 250 sheets |
| Total output capacity | 100 sheets |
| Multi-Purpose tray input capacity | 1 sheets |
| Custom media width | 76.2 - 216 mm |
| Maximum print size | 216 x 406 mm |
| Custom media length | 116 - 406.4 mm |
| Paper tray media types | Bond paper, Plain paper, Recycled paper |
| Paper tray media weight | 60 - 105 g/m² |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5, B6 |
| Multi-purpose tray media types | Bond paper, Envelopes, Heavyweight paper, Plain paper, Recycled paper |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Display | LCD |
| Market positioning | Home & office |
| Display number of lines | 2 lines |
| Display number of characters | 16 |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Processor family | ARM |
| Sound power level (standby) | 30 dB |
| Sound pressure level (printing) | 53 dB |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 55 W |
| Power consumption (PowerSave) | 0.9 W |
| Power consumption (average operating) | 445 W |
| Sustainability certificates | ENERGY STAR |
| Package weight | 13.200 g |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard |
| Windows operating systems supported | Windows 2000 Professional, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
To Next Page