Brother DCP-7055 - Hot Surface and Label Warnings; Internal Hot Parts Warning

8
Windows
®
USB
For USB Interface Users
(Windows
®
2000 Professional/XP/XP Professional x64 Edition/Windows Vista
®
/Windows
®
7)
8
Before you install
a Make sure that your computer is ON and you
are logged on with Administrator rights.
9
Install MFL-Pro Suite
a Put the installation CD-ROM into your
CD-ROM drive. If the model name screen
appears, choose your machine. If the language
screen appears, choose your language.
b Click Initial Installation and then Install
MFL-Pro Suite.
c Click Yes if you accept the license agreements.
d Follow the on-screen instructions until this
screen appears.
IMPORTANT
• If there are any programs running, close
them.
• The screens may differ depending on your
operating system.
Note
• The installation CD-ROM includes Presto!
PageManager. This software supports
Windows
®
2000, Windows
®
XP, XP
Professional x64 Edition, Windows Vista
®
and
Windows
®
7. Update to the latest Windows
®
Service Pack before installing MFL-Pro Suite.
• Before installation, if the USB cable is
connected to the computer, the "Found New
Hardware Wizard" dialog box will automatically
show, please cancel it to close the screen.
Note
If the Brother screen does not appear
automatically, go to My Computer (Computer),
double-click the CD-ROM icon, and then
double-click start.exe.
Note
• If the installation does not continue
automatically, open the top menu again by
ejecting and then reinserting the CD-ROM or
double-click the start.exe program from the
root folder, and continue from step b to install
MFL-Pro Suite.
• For Windows Vista
®
and Windows
®
7 users,
when the User Account Control screen
appears, click Allow or Yes.