4
Setting Up the Machine
3
Fan the stack of paper well to avoid paper
jams and misfeeds.
4
Put paper in the paper tray.
Check that the paper is flat in the tray and
below the maximum paper mark.
5
Put the paper tray firmly back in the machine
and unfold the Support flap before you use
the machine.
1
Push the lever up to unlock the scanner.
(The gray scanner lock lever is located at
the back left under side of the document
cover.)
For details on supported paper
specifications, see “Paper ”in Chapter 2 of
the User’s Guide.
Up to here.
Support
Flap
4
Release the Scanner
Lock
Scanner Lock Lever
Step 1
To Next Page
Loading...
