How do I fix a 'Fuser Error' on my Brother DCP-8155DN All in One Printer?
A 'Fuser Error' on your Brother All in One Printer means the temperature of the fuser unit does not rise to a specified temperature within the specified time. Turn the power switch off, wait a few seconds, and then turn it on again. Leave the machine idle for 15 minutes with the power on.
Why does my Brother DCP-8155DN All in One Printer say 'Toner Low'?
If your Brother All in One Printer displays 'Toner Low', it means the toner cartridge is near the end of its life. You can continue to print, but it's recommended to order a new toner cartridge to have it available when the printer displays 'Replace Toner'.
What to do if Brother DCP-8155DN shows 'Replace Parts Drum'?
If your Brother All in One Printer displays 'Replace Parts Drum', it means it is time to replace the drum unit. Also, if you have already replaced the drum unit, ensure that the drum unit counter was reset.
Why does my Brother DCP-8155DN All in One Printer show 'Drum Error'?
The 'Drum Error' on your Brother All in One Printer can occur because the corona wire on the drum unit needs to be cleaned, or the toner cartridge is placed in the machine without the drum unit. Clean the corona wire on the drum unit. Alternatively, put the toner cartridge into the drum unit, and then re-install the drum unit and toner cartridge assembly in the machine.
Why does my Brother DCP-8155DN say 'Cover is Open'?
The 'Cover is Open' error on your Brother All in One Printer indicates that a cover is not completely closed. This could be the front cover, the ADF cover, or the fuser cover. Ensure each of these covers is fully closed. If using the ADF, make sure it is closed when loading a document. Also, check for any paper jammed behind the fuser cover.
How to resolve 'Wrong Paper Size' error on Brother DCP-8155DN?
The 'Wrong Paper Size' error on your Brother All in One Printer means that the machine cannot find paper of the same size in any other tray after the tray currently in use has run out of paper during a copy operation. Load the correct paper size in the paper tray shown on the LCD.
What does 'Access Denied' mean on Brother DCP-8155DN?
The 'Access Denied' message on your Brother All in One Printer indicates that the function you want to use is restricted by Secure Function Lock 2.0. Contact your administrator to check your Secure Function Lock Settings.
What does 'Access Error' mean on my Brother DCP-8155DN and how to resolve it?
The 'Access Error' on your Brother All in One Printer means that the device is removed from the USB direct interface while the data is processing. Press Stop/Exit. Reinsert the device and try to print with Direct Print.
What does 'Unusable Device Remove the Device. Turn the power off and back on again' mean on my Brother All in One Printer?
The 'Unusable Device' message on your Brother All in One Printer indicates that a defective USB device or a high power consumption USB device has been connected to the USB direct interface. Unplug the device from the USB direct interface and turn the machine off and then on again.
How to resolve 'Duplex Disabled' error on Brother All in One Printer?
The 'Duplex Disabled' error on your Brother All in One Printer indicates that the back cover of the machine is not closed completely. Close the back cover of the machine.
General| Duplex printing | Yes |
|---|---|
| Print technology | Laser |
| Maximum resolution | 1200 x 1200 DPI |
| Time to first page (black, normal) | 8.5 s |
| Print speed (black, normal quality, A4/US Letter) | 40 ppm |
| Copier resize | 25 - 400 % |
| Maximum copy resolution | 1200 x 600 DPI |
| Maximum number of copies | 99 copies |
| N-in-1 copy function (N=) | 2, 4 |
| Copy speed (black, normal quality, A4) | 40 cpm |
| Scan to | E-mail, File, FTP, Image, OCR, USB |
| Scanner type | Flatbed scanner |
| Input color depth | 48 bit |
| Output color depth | 24 bit |
| Scan speed (black) | 33.5 ppm |
| Scan speed (color) | 22.4 ppm |
| Maximum scan resolution | 19200 x 19200 DPI |
| Faxing | No |
| Maximum duty cycle | 3500 pages per month |
| Page description languages | BR-Script 3, Epson FX, IBM ProPrinter, PCL 6 |
| Paper input type | Paper tray |
| Total input capacity | 250 sheets |
| Total output capacity | 150 sheets |
| Maximum input capacity | 500 sheets |
| Auto document feeder (ADF) input capacity | 50 sheets |
| Custom media width | 76.2 - 215.9 mm |
| Maximum print size | 216 x 356 mm |
| Custom media length | 127 - 355.9 mm |
| Paper tray media types | Plain paper, Recycled paper, Thin paper |
| Paper tray media weight | 60 - 105 g/m² |
| Non-ISO print media sizes | Executive |
| ISO A-series sizes (A0...A9) | A4, A5, A6 |
| ISO B-series sizes (B0...B9) | B5 |
| Maximum ISO A-series paper size | A4 |
| Multi-Purpose Tray media weight | 60 - 163 g/m² |
| Auto Document Feeder (ADF) media weight | 64 - 90 g/m² |
| Display | LCD |
| Product color | Black |
| Market positioning | Business |
| Display number of lines | 5 lines |
| Display number of characters | 22 |
| Standard interfaces | USB 2.0 |
| USB 2.0 ports quantity | 1 |
| Mobile printing technologies | Not supported |
| Supported network protocols (IPv4) | ARP, RARP, BOOTP, DHCP, APIPA, DNS, mDNS, LLMNR, LPR/LPD, SMTP, IPP/IPPS, FTP, CIFS, TELNET, SNMPv1/v2c/v3, HTTP/HTTPS, TFTP, ICMP, SNTP |
| Supported network protocols (IPv6) | NDP, RA, DNS, mDNS, LLMNR, LPR/LPD, IPP/IPPS, FTP, CIFS, TELNET, SNMPv1/v2c/v3, HTTP/HTTPS, TFTP, SMTP, ICMPv6, SNTP |
| Internal memory | 128 MB |
| Card reader integrated | - |
| Maximum internal memory | 384 MB |
| Sound pressure level (printing) | 59 dB |
| Power consumption (PowerSave) | 1.4 W |
| Power consumption (average operating) | 694 W |
| Mac operating systems supported | Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
| Server operating systems supported | Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64 |
| Windows operating systems supported | Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64 |
| Sustainability certificates | ENERGY STAR |
Weight and Dimensions| Depth | 415 mm |
|---|---|
| Width | 491 mm |
| Height | 447 mm |
| Weight | 16500 g |
Guide on how to use the manual, understand symbols, and conventions.
Instructions on how to access Brother support resources via web or CD-ROM.
Step-by-step guide for loading paper into standard, optional lower, and multi-purpose trays.
How to configure paper type and size settings for different trays.
Instructions for loading documents into the ADF for scanning or copying.
Guide on how to place documents on the scanner glass for copying or scanning.
Steps for performing a basic copy task, including setting the number of copies.
Steps for printing documents from your computer using the printer driver.
Guide on scanning documents to PDF files using ControlCenter4 software.
Guides on replacing consumables, cleaning components, and resetting counters.
Guidance on identifying and resolving common problems like jams, errors, and poor print quality.
How to check serial number, reset settings, and access machine information.
How to navigate the menu system, enter text, and configure various machine settings.
Details on general specs, document size, media, interfaces, computer requirements, and consumables.
To Next Page
