Routine maintenance
53
f Remove anything that is stuck inside the
paper tray.
g Wipe the inside and the outside of the
paper tray with a dry, lint-free cloth to
remove dust.
h Re-load the paper and put the paper tray
firmly back in the machine.
i Plug the machine’s power cord back into
the electrical socket first, then connect
all cables.
j Turn on the machine.
Cleaning the scanner glass A
a Turn off the machine.
b Disconnect all cables, and then unplug
the power cord from the electrical
socket.
c Lift the document cover (1).
Clean the white plastic surface (2) and
scanner glass (3) underneath it with a
soft lint-free cloth moistened with water.
d In the ADF unit, clean the white bar (1)
and the scanner glass strip (2)
underneath it with a soft lint-free cloth
moistened with water.
1
2
3
To Next Page
Loading...
