To Next PageTo Next PageHow to fix 'Change Drum Soon' message on Brother All in One Printer?
The 'Change Drum Soon' message on your Brother All in One Printer means the drum unit is near the end of its life. You can continue using it until print quality degrades, then replace it with a new one. If the message persists after replacement, open the front cover, press Clear/Back, and then press 1 to reset the drum counter.
What to do if my Brother DCP-8040 displays 'Check Paper Check Paper #1 Check Paper #2'?
The 'Check Paper Check Paper #1 Check Paper #2' error on your Brother All in One Printer indicates that the printer is out of paper, the paper is not loaded correctly, or there is a paper jam. Refill the paper in the paper tray or MP tray, or remove the paper and load it again.
What does 'Toner Low' mean on my Brother DCP-8040?
The 'Toner Low' message on your Brother All in One Printer means that the toner is running low. Order a new toner cartridge now.
Why does my Brother DCP-8040 display 'Toner Empty'?
The 'Toner Empty' message on your Brother All in One Printer means that the toner cartridge is either not installed or is empty. Reinstall the toner cartridge, or replace it with a new one.
What does 'Paper Jam' mean on my Brother DCP-8040?
The 'Paper Jam' error on your Brother All in One Printer indicates that paper is stuck inside the printer.
What to do if my Brother DCP-8040 All in One Printer says 'Cover Open Pls Close Cover'?
If the front cover of your Brother All in One Printer was not completely closed, the 'Cover Open Pls Close Cover' error will appear. To resolve this, ensure that you close the front cover securely.
Why does my Brother DCP-8040 say 'Cooling Down Wait for a while'?
The 'Cooling Down Wait for a while' message on your Brother All in One Printer indicates that the drum unit or toner cartridge is too hot. The printer will pause and cool down. You need to wait 20 minutes for it to cool down.
What does 'Pls Open Cover' mean on my Brother DCP-8040?
The 'Pls Open Cover' message on your Brother All in One Printer indicates a possible paper jam or obstruction inside the printer. Open the front cover and gently remove any jammed paper or obstructions. Close the cover. If the error persists, repeat opening and closing the cover. If the printer still doesn't reset, contact your Brother dealer.
How to resolve 'Check Paper Size' error on Brother DCP-8040 All in One Printer?
The 'Check Paper Size' error on your Brother All in One Printer means that the paper in the paper tray does not match the paper size you set in Menu. Load the correct size paper or change the default setting.
What to do if my Brother DCP-8040 All in One Printer says 'Check Paper MP'?
The 'Check Paper MP' error on your Brother All in One Printer means that the paper in the MP tray has run out. Reload paper into the MP tray.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Printing Technology | Laser |
| Print Resolution | 2400 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Fax Modem Speed | 33.6 Kbps |
| Paper Capacity | 250 sheets |
| Operating System Compatibility | Windows, Mac OS |
| Media Size | Letter, Legal, A4 |
| Duplex Printing | Automatic |
| Connectivity | USB, Parallel |
